Parts by:

1ZZ / 2ZZ / 3ZZ

Rodyti:

Rūšiuoti pagal:

Kolbenschmidt plain bearing measuring tape/plastic gauge 120000417001

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

€18.00

ACL plain bearing measuring tape/flexigauge AG-1 (Green)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

€16.00

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (1 pc.)

€18.00

Toyota 1.8 16V 2ZZ-GE ACL Race connecting rod bearings 4B1856H-STD

€109.00

Toyota1.8 16V 2ZZ-GE ACL Race main bearings 5M1857H-STD

€179.00

Toyota 1UZ/2UZ/3UZ-FE ACL Race main bearings 5M8088HX-STD

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.6373in / 66.987mm
Max. Std Shaft Size	2.6378in / 67.000mm
Min. Std Tunnel Size	2.8346in / 71.999mm
Max. Std Tunnel Size	2.8352in / 72.014mm
Max Wall at Crown	0.0981in / 2.491mm
Max Overall Length	0.8858in / 22.5mm (8088H/HX) 0.7677in / 19.5mm (8089H/HX)
Weight	0.45
Notes	This part has no notch.

€139.00