Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

2.0 C20LET

Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-0.25
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel/Vauxhall 2.0 16V Flywheel bolts
Opel 2.0 16V C20XE, C20LET, Z20LET ARP flywheel bolt kit 209-2801
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€73.00
Opel/Vauxhall 2.0 16v Head studs
Opel / Vauxhall 2.0 16V C20LET Z20LET ARP cylinder head stud kit 209-4301
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€217.00
Opel/Vauxhall 2.0 16v Main studs
Opel / Vauxhall 2.0 16V C20LET ARP main stud kit 209-5401
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€183.00
Opel/Vauxhall 2.0 16v ARP2000 conneting rods bolts
Opel / Vauxhall 2.0 16V ARP2000 conneting rod bolt kit 209-6003
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€167.00
Opel C20LET/XE Z20LET/LEH/LER FCP X-beam steel connecting rods 143.1mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXO14315221
Profile: X-beam
C to C: 143.10mm
Big end diameter: 52mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 2.0 16V (C20LET, C20XE, Z20LET, Z20LEH, Z20LER)
€549.00
Opel 2.0 16V Turbo C20LET C20XE FCP forged pistons CR 8.5 87mm
Opel 2.0 16V Turbo C20LET C20XE FCP forged pistons CR 8.5 87mm
Part number: FCPPOC870085
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 87.00mm
Compression ratio (CR): 8.5:1
Compression height: 30.50 mm
Pin diameter: 21mm
Stroke: 86.00mm
Opel / Vauxhall - 2.0 16V Turbo (C20LET, C20XE)

Connecting rod lengh must be 143.1mm or 148mm (2.2 block)

€769.00
Opel Supertech SPRK-H1001D-20 2.0 Valve spring set
Opel / Vauxhall 2.0 C20LET C20XE Supertech valve spring set SPRK-H1001D-C20
Springs data:
Seat pressure - 80lbs @ 34mm
Open (lift) pressure - 191lbs @ 10mm

Spring coil bind - 20.00mm
Rate - 11.00lbs/mm

Max lift - 14.00mm
Outer spring outer diameter - 29.35mm
Outer spring inner diameter - 21.85mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Dual springs - 16 pcs. SPR-H1001D
Titanium retainers - 16 pcs. RET-H70-T1
Seats - 16 pcs. SEAT-H1020DS
€599.00
Opel VS-N7E 2.0 valve seat
Opel 2.0 16V C20XE C20LET Supertech valve seal 7mm VS-N7E
Part number VS-N7E.
Supertech valve seal (intake and exhaust) for 7mm valve stem.
Guide outer diameter -11.03mm.
Seal outer diameter - 14.00mm.
For Opel / Vauxhall - 2.0 16V (C20XE, C20LET)
€2.00
Opel/Vauxhall 2.0 C20LET/XE JE Pistons CR 8.5:1 86.50mm 298737
Opel 2.0 C20LET C20XE JE Pistons kit CR 8.5 86.50mm 298737

Product detailed specification

Bore size

86.50mm

Stroke

86.00mm

JE Pistons compression ratio (CR)

8.5:1

OEM compression ratio (CR)

9.0:1

Dome volume (CC)

-16.90cm3

Compression height (CH)

30.50mm

Pin diameter

21mm

Features

Accepts Turbo and Nitrous; coated FSR series skirt

Fits for

Opel 2.0 16V (C20LET, C20XE)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!
€899.00
Opel C20XE C20LET Z20LET King Racing connecting rod bearings CR4017XPC-STD...
XP XP
1037.jpg 1001.jpg
C4017-PR C 421L-PR
Quantity  4
Crankshaft  48.986 / 48.971
Housing  51.999 / 52.012
Max Wall  1.496
Max Length  19.271
Engines: 1.8 16V (C18XE, C18XEL, X18XE)
2.0 16V (20XE, C20NE, C20XE, C20LET, X20SE, X20XEV, Z20LET, Z20LEH, Z20LER)
2.2 16V (C22SEL, X22XE, X22SE, Y22SE)
€79.00
Opel GIVN-3303F +1mm 2.0 intake valve
Opel 2.0 C20LET C20XE Supertech intake valve GIVN-3303F +1mm

Product detailed specification

Model number

GIVN-3303F

Head diameter

34.00mm

Stem diameter

6.95mm

Length

105.00mm

Material

Black nitrited

Fits for

Opel - 2.0 16V (C20XE, C20LET)

€28.00
1 2 3 4