Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Turbosmart

Turbosmart BOV / Blov-Off Valve Race Port Gen V Blue TS-0204-1131
Supplied with:

    * Vacuum fittingsprofiled alloy weld flange, V-band assembly, and Blue Spring Rated -18 to -14 InHg (installed)
    * Billet 6000 series aluminium construction
    * Quick release v-band collar for ease of installation and removal
    * 2.0" Inlet flows over 330 CFM
    * MILSPEC hard anodized valve guide and stem
    * Hi Temp Silicon Nomex diaphragm
    * Positive sealing valve seat
    * Twin 1/8"NPT pressure ports for convenient positioning
    * Collar secured cap for quick spring changes
    * 4inHg to 26inHg activation range
    * 5 user configurable corrosion resistant springs available
    * Valve position sensor option
    *Designed, manufactured and validated in-house at Turbosmart HQ

Large capacity turbocharger systems and high horsepower engines. Ideal for circuit and drag vehicles and trucks.
€375.00
Turbosmart GenV Compgate 40 external wastegate 14psi Blue TS-0552-1011
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€439.00
Turbosmart eB2 4 Port boost solenoid TS-0301-2003
* Replacement solenoid Kit for e-Boost2
* Suits all e-Boost2 models
* Supplied with 4-port solenoid, fittings and a mounting bracket
* Ideal for the active enthusiast
* Widely used in performance engines
€159.00
Turbosmart GenV Compgate 40 external wastegate 14psi Black TS-0552-1012
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€439.00
Turbosmart BOV Kompact plumb back 25mm TS-0203-1222
Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV.
€149.00
Turbosmart oil pressure regulator 40psi OPR T40 TS-0801-1003

Many Turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern & hi-performance, engines and feeding these turbochargers the appropriate amount of oil pressure hase always been a challenge. Traditional methods to limit oil pressure have been with a restrictor, aimed at reducing pressure – However this also reduces flow.

Turbosmart’s OPR T40 is a true regulator in that target oil pressure oil 40psi can be achieved without compromising oil flow. This takes the guess work out of restrictor, or feed and drain hose selection and ensure the oil going to the turbocharger, never exceeds the manufacturers tolerances – This will provide you rock solid oil supply pressure, within the manufactures tolerances.

€179.00
Turbosmart 1200-6 AN fuel pressure regulator TS-0401-1103 (blue)
Turbosmart's newest High-performance EFI fuel pressure regulator is smaller, lighter and better! Featuring two -6AN inlet ports, one -6AN return port, and one 1/8 NPT gauge port, 30-90 PSI base pressure adjustment, 1:1 ratio, premium diaphragm and stainless steel valve + seat allow for ANY fuel type including E85 and is suitable for engines with up to 1200hp fuel systems. FPR's feature a non-directional bias to regulation, so no matter where the fuel comes in they will regulate the same. Factory tested.

Supplied with: Mounting bracket and retaining clip, vacuum fitting and gauge port blank.

    EFI fuel regulator
    3 x -6AN ports
    1/8" NPT gauge port
    Capable of regulating up to 1200hp of fuel flow
    1:1 manifold pressure ratio with no load losses
    30-90psi base pressure range
    Stainless steel internals providing maximum integrity and reliability
    Suitable for all fuel types
    Operational between -35ºC to +200ºC
    MILSPEC diaphragm
    Bracket and retaining clip supplied
    Pressure port 1/16 NPT with nipple supplied
    Manufactured, assembled and validated in-house at Turbosmart HQ

€289.00
Turbosmart BOV Big Bubba BPV Sleeper TS-0204-1203
Big Bubba features:

  • CNC billet aluminium body and components
  • Huge 50.8mm/2” inlet and outlet
  • Lightweight 52mm (2.05”) hard anodised aluminium two-piece piston
  • -4AN threaded vacuum port
  • V-band mounting system interchangeable with the Race Port
  • Weighs only 790 grams (1.7lbs)
  • Designed, manufactured and validated in-house at Turbosmart HQ

Supplied With:
Alloy Hose Adapter/Weld Flange, V-Band Clamp, and Green Spring Rated -12 to -8 InHg (installed).

€479.00
Turbosmart GenV Compgate 45 external wastegate 14psi Blue TS-0553-1011
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€545.00
Innovate (MAC) 3 Port boost solenoid 3883
Specifications
  • TYPE: 3 port solenoid
  • 5.4W, 25.4ohm coil
  • Simple 2 wire connection
  • Full vacuum to 120psi capable
  • Pulse width modulation (PWM) driven
  • Numbered port connections (1 to 3)
  • Suitable for most turbo and supercharged applications
  • Compatible / used by most aftermarket ECU application 
€99.00
Turbosmart high performance multi layered blue silicone hose 3m 4mm TS-HV0403-BE
High performance multi layered silicone hose.
Constant temp resistant from -50 to 170 degrees Celsius (-60 to 340 degrees Fahrenheit) and pressure rated to 220PSI with a 5mm wall thickness.
Engineered to Win by Turbosmart.
€21.00
1 2 3
5