Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
|||||||
Quantity | 4 | ||||||
Crankshaft | 47.777 / 47.757 | ||||||
Housing | 50.599 / 50.620 | ||||||
Max Wall | 1.402 | ||||||
Max Length | 18.971 |
Product detailed specification |
|
Bore size |
81.50mm |
Stroke |
86.40mm |
Wiseco compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
9.5:1 |
Dome volume (CC) |
-7cm3 |
Compression height (CH) |
32.71mm |
Pin diameter |
20mm |
Features |
Accepts Turbo and Nitrous, Round piston skirt |
Fits for |
VAG - 1.8T 20V |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338486R
Gasket thickness: 0.85mm
Bore size: 84.00mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Valve guide info:
Part number: FCPVGA/20
Material: Bronze
Length: 38mm
Inner diameter: 7mm
Outer diameter: 12.07mm
For intake and exhaust valves
Product detailed specification |
|
Bore size |
82.00mm |
Stroke |
86.40mm |
Wiseco compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
9.5:1 |
Dome volume (CC) |
-7cm3 |
Compression height (CH) |
32.71mm |
Pin diameter |
20mm |
Features |
Accepts Turbo and Nitrous, Round piston skirt |
Fits for |
VAG - 1.8T 20V |
Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
8 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).