Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338318R
Gasket thickness: 1.90mm
Bore size: 87.50mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
NGINE BEARINGS | ||
CON ROD BEARING SET |
||
Part# | ||
4B2322H |
4B2322HX |
|
Sizes | STD, .025, .25, .50 | STD |
Oil Clearance | Standard | + 0.001" Extra |
Half Type | Upper & Lower | |
Material |
Tri-metal Hardened steel backs |
|
Min Std Shaft Size |
1.9280in / 48.971mm |
|
Max Std Shaft Size | 1.9286 in / 48.987mm | |
Min Std Tunnel Size |
2.0472in / 52.000mm |
|
Max Std Tunnel Size |
2.0477in / 52.012mm |
|
Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
Max Overall Length |
0.760in / 19.30mm |
|
Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
Diagram |
|
NGINE BEARINGS | ||
CON ROD BEARING SET |
||
Part# | ||
4B2322H |
4B2322HX |
|
Sizes | STD, .025, .25, .50 | STD |
Oil Clearance | Standard | + 0.001" Extra |
Half Type | Upper & Lower | |
Material |
Tri-metal Hardened steel backs |
|
Min Std Shaft Size |
1.9280in / 48.971mm |
|
Max Std Shaft Size | 1.9286 in / 48.987mm | |
Min Std Tunnel Size |
2.0472in / 52.000mm |
|
Max Std Tunnel Size |
2.0477in / 52.012mm |
|
Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
Max Overall Length |
0.760in / 19.30mm |
|
Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
Diagram |
|
|
|||||||
Quantity | 4 | ||||||
Crankshaft | 48.986 / 48.971 | ||||||
Housing | 51.999 / 52.012 | ||||||
Max Wall | 1.496 | ||||||
Max Length | 19.271 |
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Manufacturer: Mahle Original
Part number: 011HS18118-0.5
Manufactured in heavy duty material: TRI-Metal copper lead
For Opel / Vauxhall - 2.0 (C20XE, C20LET, Z20LEH, Z20LET)