Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330042R
Gasket thickness: 1.25mm
Bore size: 87.50mm
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338016R
Gasket thickness: 1.30mm
Bore size: 85.30mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338017R
Gasket thickness: 1.30mm
Bore size: 86.30mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Timing belt:
Length: 1457mm
Width: 29mm
Number of tooth: 153
Balance belt:
Length: 520mm
Width: 13mm
Number of tooth: 65
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
Product detailed specification |
|
Bore size |
85.00mm |
Stroke |
88.00mm |
JE Pistons compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
8.3:1 |
Dome volume (CC) |
-12.50cm3 |
Compression height (CH) |
34.70mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |
3 | 1,2,4,5 | |||||||||||||
Pairs & PN |
|
|
||||||||||||
Quantity | 1 | 4 | ||||||||||||
Crankshaft | 57.000 / 56.985 | 57.000 / 56.985 | ||||||||||||
Housing | 61.001 / 61.021 | 61.001 / 61.021 | ||||||||||||
Max Wall | 1.989 | 1.989 | ||||||||||||
Max Length | 25.499 | 20.899 |
Product detailed specification |
|
Model number |
MIVN-1007 |
Head diameter |
34.00mm |
Stem diameter |
6.57mm |
Length |
109.60mm |
Material |
Black nitrited stainless steel |
Fits for |
Mitsubishi EVO 4-9 - 2.0 16V (4G63) |
Product detailed specification |
|
Model number |
MEVI-1009 |
Head diameter |
31.50mm |
Stem diameter |
6.54mm |
Length |
109.60mm |
Material |
Inconel |
Fits for |
Mitsubishi EVO 4-9 - 2.0 16V (4G63T) |
Product detailed specification |
|
Model number |
MEVI-1007 |
Head diameter |
30.50mm |
Stem diameter |
6.54mm |
Length |
109.60mm |
Material |
Inconel |
Fits for |
Mitsubishi 2.0 16V (4G63T) |