Pistons (23)

Toyota Supra 3.0 2JZGTE Wiseco Pistons kit CR 9.5 86mm K677M86AP

Product detailed specification
Bore size	86.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	9.5:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-5.3cm³
Compression height (CH)	34.00mm
Pin diameter	5,72mm wall tool steel pins, 22mm
Features	HD2 Forging; FSR series piston skirt Pistons are with 1mm deeper valve pockets
Fits for	Toyota Supra - 3.0 (2JZGTE)

Wiseco HD2 pistons are specially designed for high-horsepower builds. Wiseco found the parts of pistons that fail when over-powered and beefed them up in those areas like the pin bore, ring lands, crown, etc. They also included a thicker wall pin that will stand up to more abuse than a standard pin. These pistons also come with Asymmetric Skirt AND is Gas Ported! This is definitely the piston to use if you are going to be pushing for big power.

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,199.00

Mercedes EVO 2 M102E25 Wiseco pistons 95.5mm CR 9.0 KE228M965

Product detailed specification
Bore size	96.50mm
Stroke	87.20mm
Wiseco compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.7:1
Dome volume (CC)	-10cm³
Compression height (CH)	34.10mm
Pin diameter	22mm
Fits for	Mercedes EVO 2 - 2.5 16V (M102E25)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

Honda S2000 2.0 F20C Wiseco forged pistons CR 8.5 89mm K632M89

Product detailed specification
Bore size	89.00mm
Stroke	84.00mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-10cm³
Compression height (CH)	28.98mm
Pin diameter	23mm
Features	Most Wiseco pistons have offset pins. Pins must be offset same as OEM for quitest operation. Due to compression height that may protrude above the deck, it is recommended that a 1.00mm thick head gasket is used. Aluminum cylinders like Alusil, Lokasil, DiAsil, Mercosil, Albond, FRM, MMC, recommended to run sleeved bores/must sleeve block or Nicasil.
Fits for	Honda RSX-S - 2.0 (K20A/Z)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€729.00

Mercedes EVO 1 M102E23 Wiseco pistons 96.50mm CR 8.5 KE230M9650

Product detailed specification
Bore size	96.50mm
Stroke	80.25mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.7:1-10.5:1
Dome volume (CC)	-10cm³
Compression height (CH)	38.90mm
Pin diameter	22mm
Fits for	Mercedes EVO 1 - 2.3 16V (M102E23)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

Nissan Skyline 2.6 RB26DETT Wiseco Pistons CR 8.25 87mm K591M87AP

Product detailed specification
Bore size	87.00mm
Stroke	73.70mm
Wiseco compression ratio (CR)	8.25:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	14cm³
Compression height (CH)	30.00mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous
Fits for	Nissan Skyline R32-R34 2.6 24V (RB26DETT)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,199.00

Audi / VW 1.8T 20V Stroker Wiseco pistons CR 8.5 82mm KE200M82

Product detailed specification
Bore size	82.00mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-14cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

Mitsubishi EVO 4-9 2.0 16V 4G63 Wiseco pistons 85.5mm CR 9/9.5 K666M855AP

Product detailed specification
Bore size	85.50mm
Stroke	88.00mm
Wiseco compression ratio (CR)	9/9.5:1
OEM compression ratio (CR)	8.3:1
Dome volume (CC)	-10.2cm³
Compression height (CH)	34.87mm
Pin diameter	22mm (5,1mm wall pin)
Fits for	Mitsubishi EVO 2.0 16V Turbo (4G63)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€799.00

Opel / Vauxhall 2.0 C20XE Wiseco pistons CR 12.5 87mm KE163M87AP

Product detailed specification
Bore size	87.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	12.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	5.2cm³
Compression height (CH)	30.19mm
Pin diameter	21mm
Features	Asymmetrical FSR series
Fits for	Opel - 2.0 16V (C20XE)

Armor Plated Wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€829.00

Subaru WRX Stroker 2.0 16V EJ20 JE Pistons CR 8.5 93.00mm 314448

Product detailed specification
Bore size	93.00mm
Stroke	79.00mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-16cc³
Compression height (CH)	30.70mm
Pin diameter	23mm
Features	Accepts Turbo and Nitrous; FSR series Skirt
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons kit 82.50mm CR 8.5

Part number: FCPPA825085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi / VW 1.8T 20V JE Pistons kit CR 9.25 81mm 242880

Product detailed specification
Bore size	81.00mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-2.7cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, coated round piston skirt
Fits for	VAG - 1.8T 20V

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Audi S4 RS4 2.7 V6 Biturbo FCP forged piston kit 82.50mm CR 8.5

Part number: FCPPA825085RS4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 30.80 mm
Pin diameter: 21mm
Stroke: 86.40mm
Audi S4 RS4 - 2.7 30V Biturbo

€1,169.00