Turbochargers

Turbosmart BOV Kompact plumb back 25mm TS-0203-1222

Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV.

€149.00

Turbosmart oil pressure regulator 40psi OPR T40 TS-0801-1003

Many Turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern & hi-performance, engines and feeding these turbochargers the appropriate amount of oil pressure hase always been a challenge. Traditional methods to limit oil pressure have been with a restrictor, aimed at reducing pressure – However this also reduces flow.

Turbosmart’s OPR T40 is a true regulator in that target oil pressure oil 40psi can be achieved without compromising oil flow. This takes the guess work out of restrictor, or feed and drain hose selection and ensure the oil going to the turbocharger, never exceeds the manufacturers tolerances – This will provide you rock solid oil supply pressure, within the manufactures tolerances.

€179.00

Pulsar 4849G Dual Ball Bearing Turbocharger 550HP Dual V-band 0.72A/R

Compressor Wheel: 48*60mm
Turbine Wheel: 54*49mm
Compressor Inlet: 3″ Hose
Compressor Outlet: 2″ Hose
Turbine Inlet: 2.5″ V-Band
Turbine Outlet: 3″ V-Band
Water Ports: -6AN
Oil Feed: -4AN to the Oil Restrictor
Oil Drain: Std T3 Oil Drain Flange

€1,199.00

TurboSystems HTX3057B1 hybrid turbocharger

✪ Compressor side Technical features:

Compressor wheel: 9+0 blades machined from the solid billet
Inducer: 57mm
Exducer: 71mm

✪ Turbine side Technical features:

Housing: 8cm2 / AR: 0.61
Turbine wheel: 9 blades
Inducer: 60mm
Exducer: 55mm

€999.00

Turbosmart BOV Big Bubba BPV Sleeper TS-0204-1203

Big Bubba features:

CNC billet aluminium body and components
Huge 50.8mm/2” inlet and outlet
Lightweight 52mm (2.05”) hard anodised aluminium two-piece piston
-4AN threaded vacuum port
V-band mounting system interchangeable with the Race Port
Weighs only 790 grams (1.7lbs)
Designed, manufactured and validated in-house at Turbosmart HQ

Supplied With:
Alloy Hose Adapter/Weld Flange, V-Band Clamp, and Green Spring Rated -12 to -8 InHg (installed).

€479.00

Turbosmart GenV Compgate 45 external wastegate 14psi Blue TS-0553-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

€545.00

VAG Transversely mounted 1.8T 20V Turbocharger K04-023

Cold side technical features:
Inducer: 42mm
Exducer: 56mm

Hot side technical features:
Inducer: 55mm
Exducer: 42mm

Kit includes turbocharger, gaskets, installation notice.

€329.00

Cometic Turbo Flange T25 gasket C4515

€15.00

Innovate (MAC) 3 Port boost solenoid 3883

Specifications

TYPE: 3 port solenoid
5.4W, 25.4ohm coil
Simple 2 wire connection
Full vacuum to 120psi capable
Pulse width modulation (PWM) driven
Numbered port connections (1 to 3)
Suitable for most turbo and supercharged applications
Compatible / used by most aftermarket ECU application

€99.00

Turbosmart FPR6 Fuel Pressure Regulator -6AN (Black) TS-0404-1022

The Turbosmart FPR6 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles with -6 / 6AN fuel systems. Utilising our Stainless Steel Valve Seat & Milspec Diaphragm the FPR6 Series is suitable for all Fuel types including Race Fuel and aggressive leaded fuels. Our FPR6 Range includes 6AN inlet and outlet and return fittings and is Available in Standard (35psi to 80psi) as well as LP (3psi to 20psi) for Low Pressure and Carburettor Systems to suit 1200HP systems.

Features
Stainless Steel Valve Seat
Suitable for all fuel types
1:1 Class Leading Ratio & Response
Adjustable Pressure
1/8 NPT Pressure Sensor Port
Unique Locking Collar Design
Milspec Diaphragm
Detailed Specific Fuel Flow Data & Spec

€289.00

Pulsar 5449G Dual Ball Bearing Turbocharger 660HP T3 0.72A/R V-band

Compressor Wheel: 54*67mm
Turbine Wheel: 54*49mm
Compressor Inlet: 3″ Hose
Compressor Outlet: 2″ Hose
Turbine Inlet: T3
Turbine Outlet: 3″ V-Band
Water Ports: -6AN
Oil Feed: -4AN to the Oil Restrictor
Oil Drain: Std T3 Oil Drain Flange

€1,249.00

TurboSystems HTX3057B2 hybrid turbocharger

✪ Compressor side Technical features:

Compressor wheel: 9+0 blades machined from the solid billet
Inducer: 57mm
Exducer: 71mm

✪ Turbine side Technical features:

Housing: 10cm2 / AR: 0.73
Turbine wheel: 9 blades
Inducer: 60mm
Exducer: 55mm

€999.00