There are no items in cart
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1946H |
4B1946HX |
|
| Sizes | STD, 025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7709in / 44.98mm |
|
| Max Std Shaft Size |
1.7717in / 45mm |
|
| Min Std Tunnel Size |
1.8898in / 48mm |
|
| Max Std Tunnel Size |
1.8907in / 48.024mm |
|
| Max Wall at Crown |
0.0592in / 1.504mm |
0.0587in /1.491mm |
| Max Overall Length |
0.7677in / 19.5mm |
|
| Notes | ||
|
Diagram |
 |
|
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338284R
Gasket thickness: 1.20mm
Bore size: 83.00mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338376R
Gasket thickness: 1.30mm
Bore size: 84.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Teilenummer beginnt 330 |
|
|
Athena Vorteile |
|
|
Verstärktes Material |
OE genehmigt Asbestfreie Verbund Rohstof |
|
Edelstahlringen (AISI304) |
Einzelne Edelstahlringe gewährleisten maximale Besiegelung um die Zylinderbohrungen, unter extremen Bedingungen, auch mit dem NOS-System und/oder Turbo-Aufladung, wenn die MLS Dichtung unfähig abgedichtet Brennkammer arbeitet. Zylinderkopf und Motorblock benötigt keine speziellen Behandlungen. |
|
Silikon Beading |
Silikon Beading wird auf kritische Bereiche angewendet zu verbessern Abdichten um alle Kühlwasser- und Ölkanäle. |
Product detailed specification
Manufacturer: FCP Engineering
|
Product detailed specification |
|
|
Model number |
HEVN-200F |
|
Head diameter |
28.00mm |
|
Stem diameter |
5.45mm |
|
Length |
102.50mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
Honda B16A B17A B18C |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 50.000 / 49.985 | ||||||
| Housing | 53.696 / 53.708 | ||||||
| Max Wall | 1.834 | ||||||
| Max Length | 20.201 |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338006R
Gasket thickness: 1.30mm
Bore size: 82.50mm
|
Teilenummer beginnt 338 |
|
|
Athena Vorteile |
|
|
Optimierte Radius Prägeform |
Die runde Form der Prägung erhöht Besiegelung auf Zylinderbohrung, Öl- und Kühlwasserkanäle und und verbessert der Rückfederung Stärke |
|
Fortschrittliche Stoppertechnik |
Der Stand der Technik erhöht den Dichtungsdruck um den Zylinder. Höchste Dichteigenschaften bei Hochleistungsmotoren |
|
Beschichtungstechnik |
Entworfen und konstruiert von Athena die spezielle Beschichtung auf Stahloberflächen aufgebracht, verbessert die |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338269R
Gasket thickness: 1.60mm
Bore size: 86.20mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338408R
Gasket thickness: 0.85mm
Bore size: 85.80mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
