There are no items in cart
| 1,2,3,4,5 | |||||||
| Pairs & PN |
|
||||||
| Quantity | 5 | ||||||
| Crankshaft | 57.000 / 56.985 | ||||||
| Housing | 61.001 / 61.021 | ||||||
| Max Wall | 1.989 | ||||||
| Max Length | 20.599 |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF) |
Set includes:
1 crankshaft seal front
1 crankshaft seal rear
1 oil filter housing gasket
1 oil pump gasket
1 universal sealing compound
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2960H |
4B2960HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.888in / 47.956mm |
|
| Max Std Shaft Size |
1.8887in / 47.974mm |
|
| Min Std Tunnel Size |
2.0079in / 51.000mm |
|
| Max Std Tunnel Size |
2.0084in / 51.013mm |
|
| Max Wall at Crown |
0.0592in / 1.503mm |
0.0587in / 1.490mm |
| Max Overall Length |
0.673in / 17.10mm |
|
| Notes | ||
|
Diagram |
 |
|
Engines Nissan - 2.0 (SR20DE, SR20DET (not GTiR))
Spring data:
Seat pressure - 63lbs @ 34.30mm
Open (lift) pressure - 167lbs @ 10mm
Spring coil bind - 20.00mm
Rate - 10.40lbs/mm
Max lift - 14.00mm
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Set includes:
Dual springs: 16 pcs. SPR-TS1012
Titanium retainers: 16 pcs. RET-TS50/T1
| ENGINE BEARINGS | ||
| MAIN BEARING SET | |
| Part# | ||
| 5M2167H | 5M2167HX | |
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size | 2.2437 in / 56.990 mm | |
| Max Std Shaft Size | 2.2441 in / 57.000mm | |
| Min Std Tunnel Size | 2.3866 in / 60.620 mm | |
| Max Std Tunnel Size | 2.3874 in / 60.640 mm | |
| Max Wall at Crown | 0.0710 in / 1.803 mm | 0.0705 in / 1.790 mm |
| Max Overall Length | 0.935 in / 23.75 mm | |
| Notes | ||
Diagram (Top View) |  | |
