There are no items in cart
Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 7M1532H |
7M1532HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.3611in / 59.971mm | |
| Max Std Shaft Size | 2.3618in / 59.990mm | |
| Min Std Tunnel Size | 2.5591in / 65.000mm | |
| Max Std Tunnel Size | 2.5598in / 65.019mm | |
| Max Wall at Crown | 0.0980in / 2.490mm | 0.0930in / 2.478mm |
| Max Overall Length |
0.787in / 20.00mm #1,2,3,4,5,7 0.982in / 24.94mm #6 thrust |
|
| Notes | ||
|
Diagram |
|
|
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-9.70cm3 |
|
Compression height (CH) |
32.70mm |
|
Pin diameter |
20mm |
|
Fits for |
Audi 1.8T 20V (AEB, AGU and many others) |
| ENGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B8296H |
4B8296HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0466in / 51.984mm |
|
| Max Std Shaft Size |
2.0472in / 51.000mm |
|
| Min Std Tunnel Size |
2.1654in / 55.000mm |
|
| Max Std Tunnel Size |
2.1661in / 55.020mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0585in / 1.487mm |
| Max Overall Length |
0.6496in / 16.50mm |
|
| Notes | Suits 52mm journal only | |
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B1185H |
4B1185HX |
|
| Sizes | STD,.025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7709in / 44.981mm |
|
| Max Std Shaft Size |
1.7715in / 44.996mm |
|
| Min Std Tunnel Size | 1.8897in / 47.998mm | |
| Max Std Tunnel Size |
1.8905in / 48.019mm |
|
| Max Wall at Crown |
0.0586in / 1.488mm |
0.0581in / 1.475mm |
| Max Overall Length |
0.8307in / 21.10mm |
|
| Notes | ||
|
Diagram |
 |
|
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHATSI14450621T
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Big end width: 21.90mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW chain driven engines - 2.0 16V TSI (EA888)
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-4.50cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Part number 61-29305-00
Victor Reinz cylinder head gasket set
For VAG engines:
Audi 80, 100, A6, Coupe - 2.0 16V (6A, AAE, AAD, ABK, ACE)
Seat Cordoba, Ibiza - 2.0 8V (2E, AGG), 2.0 16V (ABF)
VW Corrado, Golf, Passat, Sharan, Vento - 2.0 8V (2E, ABA, ADY, AEP, AKR, AGG, ATM), 2.0 16V (9A, ABF)
