Clutches

BMW M3 E46 3.2 S54B32 24V FCP racing valve spring set

Valve springs data
Installed seat pressure - 40kg (88lbs)
Load - 100kg@12mm (220lbs@12mm)
Max lift - up to 13mm,
Made from chrome-silicon steel SAE9254-V
24 pcs. valve double springs
Fits BMW M3 - 3.2 24V (S54B32)
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Can be used together with standard retainers and seats.

€399.00

BMW 2.0 2.5 2.8 3.0 M50 M52 M54 Turbo FCP H-beam steel connecting rods 133mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHB1334822-6
Profile: H-beam
C to C: 133mm
Big end diameter: 48mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW - 2.0 2.5 2.8 3.0 3.2 (M50, M52, M54, S50 USA, S52 USA)
Used for turbo conversion with OEM pistons

€639.00

Toyota Supra 3.0 2JZGTE Wiseco Pistons kit CR 9.7 87mm K677M87AP

Product detailed specification
Bore size	87.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	9.5:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-5.3cm³
Compression height (CH)	34.00mm
Pin diameter	5,72mm wall tool steel pins, 22mm
Features	HD2 Forging; FSR series piston skirt Pistons are with 1mm deeper valve pockets
Fits for	Toyota Supra - 3.0 (2JZGTE)

Wiseco HD2 pistons are specially designed for high-horsepower builds. Wiseco found the parts of pistons that fail when over-powered and beefed them up in those areas like the pin bore, ring lands, crown, etc. They also included a thicker wall pin that will stand up to more abuse than a standard pin. These pistons also come with Asymmetric Skirt AND is Gas Ported! This is definitely the piston to use if you are going to be pushing for big power.

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,199.00

Audi / VW 2.0 16V TSI EA888 JE Pistons kit FSR coated CR 9.6 82.5mm 353839

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-7.1cm³
Compression height (CH)	29.60mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; coated FSR series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Subaru WRX 2.5 EJ25 EJ257 Athena Cooper Ring cylinder head gasket set...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330078R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 101.30mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€279.00

Opel / Vauxhall 2.0 16V Z20LET ARP crankshaft main stud kit 209-Z20MSK

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€223.00

Opel 2.0 C20LET Z20LET ACL Race Series main bearings 5M2327H-0.25

€113.00

Cometic VAG 1.8-2.0 8V-16V MLS cylinder head gasket 83x1.3mm C4247-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€130.00

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 11.5 84mm 279949

Product detailed specification
Bore size	84.00mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-6.80cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,349.00

Audi / VW 02A ring gear bolt kit 204-3002

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€119.00

Honda RSX-S 2.0 K20A/Z Wiseco forged pistons CR 12.4 86mm K650M86

Product detailed specification
Bore size	86.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	12.4:1
OEM compression ratio (CR)	11.7:1
Dome volume (CC)	10.5cm³
Compression height (CH)	30.00mm
Pin diameter	22mm
Features	Most Wiseco pistons have offset pins. Pins must be offset same as OEM for quitest operation. Utilizes extra deep valve pockets to expand the range of I-Vtec/Vanos with big/high lift cams and milled heads.
Fits for	Honda RSX-S - 2.0 (K20A/Z)

€799.00

Audi 2.2 20V turbo S2 / RS2 FCP forged piston kit

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged piston kit 82mm CR 8.5

Part number: FCPPA820085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00