1ZZ / 2ZZ / 3ZZ

Anzeigen:

Sortiere nach:

Kolbenschmidt plastigage Meßstreifen für Gleitlager 120000417001

Teilenummer 50009880.
Kolbenschmidt Plastigage Meßstreifen Gleitlager Kit (10 Stk.).
Messstreifen zur Bestimmung des Lagerspiels bei Gleitlager.

18,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AG-1 (Grün)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick Montageschmierstoff für Motorlager 118ml (1 Stk.)

18,00 €

Toyota 1.8 16V 2ZZ-GE ACL Race Pleuellager Satz 4B1856H-STD

109,00 €

Toyota1.8 16V 2ZZ-GE ACL Race Hauptlager Satz 5M1857H-STD

179,00 €

Toyota 1UZ/2UZ/3UZ-FE ACL Race Hauptlager 5M8088HX-STD

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.6373in / 66.987mm
Max. Std Shaft Size	2.6378in / 67.000mm
Min. Std Tunnel Size	2.8346in / 71.999mm
Max. Std Tunnel Size	2.8352in / 72.014mm
Max Wall at Crown	0.0981in / 2.491mm
Max Overall Length	0.8858in / 22.5mm (8088H/HX) 0.7677in / 19.5mm (8089H/HX)
Weight	0.45
Notes	This part has no notch.

139,00 €