Parts by engine

Audi / VW 2.0 16V TSI TFSI Supertech valve spring set SPR-A2416-N2

Spring data:
Seat pressure - 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 190lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 16 pcs. SPR-A2416

€340.00

BMW 2.5 2.8 3.0 M50 M52 M54, S50/S52 USA FCP valve guide kit 7mm

€169.00

Audi / VW 1.8T 20V Stroker Wiseco pistons CR 8.5 82.5mm KE200M825

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-14cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

VW Rabitt / Audi TT RS 2.5 20V TFSI Supertech valve spring set SPR-A2416-5

Spring data:
Seat pressure - 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 109lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 20 pcs. SPR-A2416

€430.00

Audi 2.2T 2.3 20V 3B AAN 7A ACL Duraglide main bearings STD

€99.00

Cometic BMW 2.5 2.8 3.0 M54 MLS cylinder head gasket 85x1.3mm C4352-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€239.00

Audi TT RS 2.5 20V TFSI DAZA Athena Cooper Ring cylinder head gasket...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330117R
Gasket thickness: 1.40mm
Bore size: 83.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

FCP engine repair kit 1

€245.00

Cometic BMW 2.5 2.8 3.0 M54 MLS cylinder head gasket 85x2mm C4352-080

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€325.00

Audi TTRS RS3 2.5 20V TFSI FCP H-beam steel connecting rods 144mm/23mm for...

Product detailed specification

Manufacturer: FCP Engineering

Model: FCPRHA14450623T-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM

€539.00

Audi 2.2T 2.3 20V 3B AAN 7A ACL Duraglide main bearings 0.25mm

€99.00

Cometic BMW 2.5 2.8 3.0 M54 MLS cylinder head gasket 85x1.8mm C4352-070

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€299.00