Parts by engine

Audi / VW 1.8 2.0 8V Supertech Inconel exhaust valve VWEVI-1015 +0.5mm

Product detailed specification
Model number	VWEVI-1015
Head diameter	33.50mm
Stem diameter	6.96mm
Length	90.95mm
Material	Inconel
Fits for	VW / Audi - 1.8-2.0 8V

€39.00

Toyota 2.0 3S-GE 3S-GTE ACL Race connecting rod bearings 4B8366H-0.25

€72.00

BMW / Toyota 3.0 B58B30 S58B30 ARP cylinder head stud kit 201-4701 / 203-4705

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€589.00

Ford Escort 1.6L ARP cylinder head stud kit 151-4203

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€219.00

BMW coated N62B44 V8 JE Pistons kit CR 10.5 92mm

Product detailed specification
Bore size	92.00mm
Stroke	82.70mm
JE Pistons compression ratio (CR)	10.5:1
Dome volume (CC)	0.30cm³
Compression height (CH)	28.45mm
Pin diameter	21mm (HD pins)
Features	Accepts Turbo and Nitrous
Fits for	BMW - 4.4 (N62B44)

€2,699.00

Toyota 2.8 3.0 5M-GE 7M-GE/7M-GTE ACL Duraglide connecting rod bearings...

€75.00

Lancia Delta, Fiat Coupe 2.0 16V Turbo FCP X-beam steel connecting rods 145mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXL1455422
Profile: X-beam
C to C: 145mm
Big end diameter: 53.91mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (4 cylinder)
Advertised RPM rating: 9000RPM
Lancia Delta - 2.0 8V, 2.0 16V Turbo (835, 836)
Fiat Coupe - 2.0 16V Turbo (175 A1.000)

€549.00

Audi S6 S4 RS4 2.7T 2.8 3.0 30V racing valve spring kit

Audi S6 S4 RS4 2.7T 2.8 3.0 30V FCP valve spring kit

Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can be used together with standard or with FCP titanium retainers.

€375.00

Audi / VW 1.6 1.8 2.0 ACL Race connecting rod bearings 4B1606H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram (Top View)

Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applications, 1983-2003)

€72.00

BMW M3 E30 2.3 S14 ARP head stud kit 201-4605

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€248.00

Mitsubishi 4G63T 4G64 ACL Race main bearings 5M1219HX-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1219H	5M1219HX
Sizes	STD,.025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-Metal
Min Std Shaft Size	2.2435in / 56.985mm
Max Std Shaft Size	2.2441in / 57.000mm
Min Std Tunnel Size	2.4016in / 61.000mm
Max Std Tunnel Size	2.4024in / 61.021mm
Max Wall at Crown	0.0783in / 1.990mm	0.0778in / 1.977mm
Max Overall Length	0.8268in / 21.00mm
Notes	For engines equipped with thrust washers
Diagram (Top View)

Engines Mitsubishi - 2.0 (4G63, 4G63-T, 4G64-S4)

€95.00

Mitsubishi EVO X 4B11T ACL Race Series main bearings 5M1237H-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1237H	5M1237HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-Metal
Min Std Shaft Size	2.0462 in / 51.973 mm
Max Std Shaft Size	2.0467 in / 51.985 mm
Min Std Tunnel Size	2.2047 in / 56.000 mm
Max Std Tunnel Size	2.2054 in / 56.018 mm
Max Wall at Crown	0.0786 in / 1.996 mm	0.0781 in / 1.983 mm
Max Overall Length	0.709 in / 18.00 mm
Notes	-
Diagram (Top View)

Engines Mitsubishi EVO X - 2.0 16V (4B11T)

€139.00