Parts by engine

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race connecting rod bearings 4B8296H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B8296H	4B8296HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0466in / 51.984mm
Max Std Shaft Size	2.0472in / 51.000mm
Min Std Tunnel Size	2.1654in / 55.000mm
Max Std Tunnel Size	2.1661in / 55.020mm
Max Wall at Crown	0.0591in / 1.500mm	0.0585in / 1.487mm
Max Overall Length	0.6496in / 16.50mm
Notes	Suits 52mm journal only
Diagram (Top View)

Engines Subaru 4 cylinder 1.8 2.0 2.2 2.5
(EJ18, EJ20, EJ22, J25, EJ20T, EJ20TT, EJ22T, EJ25T)

€69.00

Audi 1.6 1.8 2.0 ACL thrust washers kit 2T1644-STD

Part number 2T1644-STD
ACL thrust washers kit
Audi / VW - 1.6 1.8 2.0 (1983-2001)

€19.00

BMW 2.0 2.5 2.8 3.0 M50 Athena Cooper Ring cylinder head gasket 86x2mm 330013R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330013R
Gasket thickness: 2.00mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

BMW M3 E46 3.2 S54B32 Supertech valve spring set SPRK-2521-2BM-T1

Spring data:
Seat pressure - 82lbs @ 41.00mm
Open (lift) pressure - 186lbs @ 10.00mm
Spring coil bind - 25.50mm
Max lift - 15.50mm
Rate - 10.00mm
Outer spring outer diameter - 26.40mm
Outer spring inner diameter - 19.30mm
Inner spring outer diameter - 19.30mm
Inner spring inner diameter - 14.50mm

Set includes:
Double springs - 24 pcs. SPR-2521-BM
Titanium retainers - 24 pcs. RET-BM2521-T1
Seats - 24 pcs. SEAT-BMS54

€965.00

Mitsubishi EVO I-IX 2.0 2.4 King Racing cankshaft main bearing set...

1,2,3,4,5

Pairs & PN

XP	XP

M5315U/PR	M5315L/PR

Quantity

5

Crankshaft

57.000 / 56.985

Housing

61.001 / 61.021

Max Wall

1.989

Max Length

20.599

Engines Mitsubishi EVO I-IX
4G63, 4G63T, 4G64, 4D68, 4G69, G4JS

€95.00

Audi 2.7 A6 S4 RS4 Wossner pistons kit 82mm CR 8.5 K9091D100

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-9.60cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Fits for	Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF)

€1,349.00

VAG (Audi, Seat, VW) 2.0 TFSI (belt drive) Victor Reinz crankcase gasket set

Audi / VW 2.0 TFSI EA113 Victor Reinz crankcase gasket set 08-35054-02

Set includes:
1 crankshaft seal front
1 crankshaft seal rear
1 oil filter housing gasket
1 oil pump gasket
1 universal sealing compound
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)

€95.00

Opel 2.0 16V Turbo C20LET C20XE FCP forged pistons CR 8.5 86.5mm

Part number: FCPPOC865085
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 86.50mm
Compression ratio (CR): 8.5:1
Compression height: 30.50 mm
Pin diameter: 21mm
Stroke: 86.00mm
Opel / Vauxhall - 2.0 16V Turbo (C20LET, C20XE)

Connecting rod lengh must be 143.1mm or 148mm (2.2 block)

€769.00

Opel 2.0 Turbo Y20LET Z20LET/LEH/LER FCP forged pistons CR 8.8 86.5mm

Opel 2.0 Turbo Z20LET/LEH/LER FCP Y20LET forged pistons CR 8.5 86.5mm

Part number: FCPPOZ865085
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 86.50mm
Compression ratio (CR): 8.5:1
Compression height: 30.40 mm
Pin diameter: 21mm
Stroke: 86.00mm
Opel / Vauxhall - 2.0 16V Turbo (Z20LET, Z20LER, Z20LEH, Y20LET)

Connecting rod lengh must be 143.1mm

€769.00

VW 2.8 2.9 12V VR6 FCP racing solid lifters (cam followers, tappets)

Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
12 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

€275.00

Toyota Supra 2JZGE 2JZGTE Supertech intake valve guide GDE-T2JZ-I

€10.00

Mitsubishi EVO X 2.0 16V 4B11 Supertech valve spring kit SPRK-M1015-EX2

Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure - 75lbs@35.30mm
Spring coil bind - 20.70mm
Rate - 12.10lbs/mm
Max lift - 14.50mm

Set includes:
Dual springs - 16 pcs. SPR-M1015
Titanium retainers - 16 pcs. RET-TS55-T1EX
Seats - 16 pcs. SEAT-M1015-1 + OEM

€625.00