Parts by engine

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHN1655923T
Profile: H-beam
C to C: 165mm
Big end diameter: 59mm
Pin diameter: 23mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
Nissan GT-R - 3.8 24V V6 Twin Turbo (VR38DETT)

Manufacturer: FCP Engineering
Model: FCPRHH1395122
Profile: H-beam
C to C: 138.9mm
Big end diameter: 51mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Honda - 2.0 16V (K20A/Z)

Product detailed specification
Bore size	84.50mm
Stroke	89.60mm
MAHLE compression ratio (CR)	10.3:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-17.2cm3
Compression height (CH)	31.70mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	BMW - 3.0 24V Turbo (N54B30)

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
Mahle compression ratio (CR)	9.4:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-4.5cm3
Compression height (CH)	33.37mm
Pin diameter	23mm
Features	2618 alloy
Fits for	Mitsubishi EVO X - 2.0 16V (4B11T)

PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	7M1532H	7M1532HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal
Min Std Shaft Size	2.3611in / 59.971mm
Max Std Shaft Size	2.3618in / 59.990mm
Min Std Tunnel Size	2.5591in / 65.000mm
Max Std Tunnel Size	2.5598in / 65.019mm
Max Wall at Crown	0.0980in / 2.490mm	0.0930in / 2.478mm
Max Overall Length	0.787in / 20.00mm #1,2,3,4,5,7 0.982in / 24.94mm #6 thrust
Notes
Diagram        (Top View)

Engines BMW - 2.0 2.2 2.3 2.5 2.7 2.8 3.0 3.2 (M20 (just for variant with two bearing locks), M50B20, M52B20, M50B25, M52B25, M54B25, M54B30, M50B27, S50B30, S50B32, S52B32, S54B32)