There are no items in cart
Upper | Lower | Quantity | Position | Crankshaft | Housing | Max Length | Max Wall |
|---|---|---|---|---|---|---|---|
SV  |
SV  |
8 | 53.99 / 53.97 | 57.61 / 57.60 | 14.8 | 1.796 |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 6B1515H |
6B1515HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9675in / 49.975mm |
|
| Max Std Shaft Size |
1.9681in / 49.991mm |
|
| Min Std Tunnel Size |
2.0866in / 53.000mm |
|
| Max Std Tunnel Size |
2.0875in / 53.015mm |
|
| Max Wall at Crown |
0.0588in / 1.493mm |
0.0538in / 1.481mm |
| Max Overall Length |
0.709in / 18.00mm |
|
| Notes | ||
|
Diagram |
 |
|
Engines BMW M3 E36 - 3.0 (S50B30)
|
Product detailed specification |
|
|
Bore size |
86.00mm |
|
Stroke |
88.00mm |
|
Wossner compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-5.20cm3 |
|
Compression height (CH) |
34.30mm |
|
Pin diameter |
22mm |
|
Fits for |
Mitsubishi EVO 2.0 16V Turbo (4G63) |
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-7.60cm3 |
|
Compression height (CH) |
32.80mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; FSR series skirt |
|
Fits for |
Audi - 2.2 20V Turbo (3B, ABY, ADU, AAN) |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-3.90cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
|
Product detailed specification |
|
|
Bore size |
86.00mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-16.20cm3 |
|
Compression height (CH) |
30.50mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
|
Fits for |
Opel - 2.0 16V (C20LET, C20XE) |
Spring data:
Seat pressure - 94lbs @ 35.70mm
Open (lift) pressure - 209lbs @ 10mm
Spring coil bind - 20.70mm
Rate - 11.50lbs/mm
Max lift - 15.00mm
Outer spring outer diameter: 29.65mm
Outer spring inner diameter: 21.85mm
Inner spring outer diameter: 20.50mm
Inner spring inner diameter: 15.50mm
Set includes:
Dual springs: 24 pcs. SPR-H1005D-BM
Titanium retainers: 24 pcs. RET-AU5VE-T1
Seats: 24 pcs. SEAT-BM60
Spring data:
Seat pressure - 80lbs @ 36.00mm
Open (lift) pressure - 205lbs @ 10mm
Spring coil bind - 12/17mm
Rate - 12.60lbs/mm
Max lift - 13.90mm
Outer spring outer diameter: 25.00mm
Outer spring inner diameter: 18.00mm
Inner spring outer diameter: 18.00mm
Inner spring inner diameter: 13.00mm
Set includes:
Dual springs: 24 pcs. SPR-TC25D-VR6
Titanium retainers: 24 pcs. RET-K20A3-TC25
Seats: 24 pcs. SEAT-VR624
Length: 1144mm
Width: 25mm
Number of tooth: 143
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
