Модули

       Key features

• works with EMU and EMU BLACK using serial communication,
• > 4GB SDHC memory cards with FAT32,
• built in BlueTooth module,
• bespoke anodized aluminium enclosure with two LEDs indicating device state, memory card transfer and Bluetooth communication

     Product features

• Up to 8 EGT probes,
• Cold junction compensation
• 0-1250C input range
• CAN 2.0 compatible
• Configurable CAN bitrate, byte order (Intel, Motorola), message IDs
• USB port for PC connection
• Client software for configuration and temperature monitoring

Key features

• CAN BUS 2.0B
• 500 or 1000kbps, user selectable
• different CAN ID and CAN frame structures can be selected,
• only 25x25mm in size,
• 8  switch inputs (switched to ground)
• 8 analog inputs / rotary switch inputs, 0-5V, 10bits
• 4 low side outputs (0.5A, resistive and inductive loads)
• 6-22V power supply
• +5V output for powering rotary switches, sensors and potentiometers
• firmware upgrade over the CAN bus

Key features

•Bosch LSU 4.9 support (ADV version also available)
•Operating voltage range: 9 -16V
•Current consumption: up to 3A (during warm up)
•IP65 enclosure
•2 programmable analog outputs 0-5V
•Communication and setup: CAN 2.0A/B

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z