В корзине нет товаров
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель:FCPRHO129754618
Профиль:профиль H
С на С: 129.75mm
Диаметр отверстия нижней головки:: 46mm
Диаметр пальца: 18mm
Количество: 4 шт., 8 шт. ARP2000 5/16" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 600HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Opel / Vauxhall - 1.6 1.8 (X16XE, C16XE, X18XE)
|
Product detailed specification |
|
|
Model number |
GEVI-3320S |
|
Head diameter |
27.50mm |
|
Stem diameter |
4.95mm |
|
Length |
113.15mm |
|
Material |
Inconel |
|
Fits for |
Opel - 1.6 1.8 (Z16LER, Z18LER, A18XER) |
|
Product detailed specification |
|
|
Model number |
GIVN-3320S |
|
Head diameter |
31.30mm |
|
Stem diameter |
4.96mm |
|
Length |
113.85mm |
|
Material |
Black nitrited |
|
Fits for |
Opel - 1.6 1.8 (Z16LER, Z18LER, A18XER) |
|
Product detailed specification |
|
|
Bore size |
79.00mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
11.5:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
+3.50cm3 |
|
Compression height (CH) |
28.20mm |
|
Pin diameter |
18mm |
|
Fits for |
Opel 1.6 16V (X16XEL, C16XE) |
|
Product detailed specification |
|
|
Bore size |
79.00mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-3.50cm3 |
|
Compression height (CH) |
28.00mm |
|
Pin diameter |
19mm |
|
Fits for |
Opel 1.6 (Z16LER) |
|
Product detailed specification |
|
|
Bore size |
79.50mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
11.5:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
+3.50cm3 |
|
Compression height (CH) |
28.20mm |
|
Pin diameter |
18mm |
|
Fits for |
Opel 1.6 16V (X16XEL / C16XE) |
|
Product detailed specification |
|
|
Bore size |
79.50mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-3.50cm3 |
|
Compression height (CH) |
28.00mm |
|
Pin diameter |
19mm |
|
Fits for |
Opel 1.6 16V (Z16LER) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338286R
Gasket thickness: 1.50mm
Bore size: 87.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
| NGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
| NGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
|
|
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
| NGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
|
|
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
