кликните сюда открыть старую версию сайта
Все категории
Parts by Car
Go
Parts by Car
Go
Части от:
категория

Audi / VW

Audi/VW CR4104XP 1.6 1.8 2.0 connecting rod bearings
Audi / VW 2.0 16-20V FSI TFSI King Racing connecting rod bearings CR4597XP-STD
Pairs & PN
XP XP
1032.jpg 1032.jpg
C4597-PR C4597-PR
Quantity   4
Crankshaft   47.777 / 47.757
Housing   50.599 / 50.620
Max Wall   1.402
Max Length   18.999
Engines: Audi / VW - 2.0 16-20V (ALT, AWA, AXW, BMB, AXX, BGB, BUL, BWA, BWE)
64,00 €
Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 King Racing connecting rod bearings...
XP XP
1006.jpg 1006.jpg
C6764-PR C6764-PR
Quantity   6
Crankshaft   53.978 / 53.957
Housing   56.799 / 56.820
Max Wall   1.402
Max Length   16.901
Engines: Audi / VW - 2.8 2.9 3.2 3.6 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
149,00 €
ACL plain bearing measuring tape/flexigauge AR-1 (Red)
1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.
16,00 €
Audi/VW CR4104XP 1.6 1.8 2.0 connecting rod bearings
Audi / VW 1.6 1.8 2.0 King Racing connecting rod bearings CR4104XP-STD
XP XP
1014.jpg 1014.jpg
C4104-PR C4104-PR
Quantity   4
Crankshaft   47.777 / 47.757
Housing   50.599 / 50.620
Max Wall   1.402
Max Length   18.971
Engines  Fits all 4 cylinder engines with 50.60mm big end:
1.6 1.8 (incl. Turbo) 2.0 (9A, KR, PL, 3A, AFB, AGU, AEB, ANB, APH, APU, ARZ, AVC, AWC, ARX, AUM, AUQ, AWM, AWP, AWT, AWU, AWV, BBU, etc.)
65,00 €
Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 King Racing connecting rod bearings...
XP XP
1006.jpg 1006.jpg
C6764-PR C6764-PR
Quantity  6
Crankshaft  53.978 / 53.957
Housing  56.799 / 56.820
Max Wall  1.402
Max Length  16.901
Engines: Audi / VW - 2.8 2.9 3.2 3.6 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
149,00 €
Audi/VW CR4104XP 1.6 1.8 2.0 connecting rod bearings
Audi / VW 2.0 16-20V FSI TFSI King Racing connecting rod bearings CR4597XP-0.25
Pairs & PN
XP XP
1032.jpg 1032.jpg
C4597-PR C4597-PR
Quantity   4
Crankshaft   47.777 / 47.757
Housing   50.599 / 50.620
Max Wall   1.402
Max Length   18.999
Engines: Audi / VW - 2.0 16-20V (ALT, AWA, AXW, BMB, AXX, BGB, BUL, BWA, BWE)
64,00 €
Audi 2.2T 10V 1B 2B MC King connecting rod bearings CR501AM
Upper
Lower

Quantity

Position

Crankshaft

Housing

Max Length

Max Wall
AM 1006.jpg 5 45.96 / 45.94 49.01 / 49.00 19.0 1.502
49,00 €
Audi/VW CR4104XP 1.6 1.8 2.0 connecting rod bearings
Audi / VW 1.6 1.8 2.0 King Racing connecting rod bearings CR4104XP-STDX
XP XP
1014.jpg 1014.jpg
C4104-PR C4104-PR
Quantity  4
Crankshaft  47.777 / 47.757
Housing  50.599 / 50.620
Max Wall  1.402
Max Length  18.971
Engines  Fits all 4 cylinder engines with 50.60mm big end:
1.6 1.8 (incl. Turbo) 2.0 (9A, KR, PL, 3A, AFB, AGU, AEB, ANB, APH, APU, ARZ, AVC, AWC, ARX, AUM, AUQ, AWM, AWP, AWT, AWU, AWV, BBU, etc.)
65,00 €
1 2 3