Volvo

Volvo 2.0 2.3 ACL Race connecting rod bearings kit 4B2726H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2726H
Sizes	STD
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9285in / 48.984mm
Max Std Shaft Size	1.9293in / 49.004mm
Min Std Tunnel Size	2.0472in / 51.999mm
Max Std Tunnel Size	2.0478in / 52.014mm
Max Wall at Crown	0.0585in / 1.486mm
Max Overall Length	0.945in / 24.00mm
Notes
Diagram (Top View)

Engines Volvo - 2.0 2.3 (B200, B204, B230, B234)

119,00 €

Kolbenschmidt plain bearing measuring tape/plastic gauge 120000417001

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

18,00 €

ACL plain bearing measuring tape/flexigauge AG-1 (Green)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (1 pc.)

18,00 €

Volvo B230F B234F ACL Duraglide main bearings 5M2727-STD

89,00 €

Ford / Volvo 2.5L 5-cyl. ACL Race connecting rod bearing kit 5B7880H

99,00 €

Ford / Volvo 2.5L 5-cyl. ACL Race connecting rod bearing kit 5B7880H-0.25

99,00 €

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Ford / Volvo 2.5L 5-cyl. ACL Race connecting rod bearing kit 5B7880HX

99,00 €

Ajusa Ajulube assembly lubricant for engine 100ml 1pc. 75000300

15,00 €