VW 2.0 16V 9A ABF

Audi/VW VWEVI-1034F standard 1.8 2.0 2.2 exhaust valve

Audi / VW 1.8-2.0 16V 2.2T 20V Supertech Inconel exhaust valve VWEVI-1037 +1.5mm

Product detailed specification
Model number	VWEVI-1037
Head diameter	29.50mm
Stem diameter	7.00mm
Length	98.20mm
Material	Inconel
Fits for	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF +2.5mm, 3B, AAN, ABY, ADU, 7A)

39,00 €

Audi/VW VWEVI-1035 +0.5mm 1.8 2.0 2.2 exhaust valve

Audi / VW 1.8-2.0 16V 2.2T 20V Supertech exhaust valve VWEVN-1035 +0.5mm

Product detailed specification
Model number	VWEVN-1035
Head diameter	28.50mm
Stem diameter	7.00mm
Length	98.20mm
Material	Black nitrided stainless steel
Fits for	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF +1.5mm, 3B, AAN, ABY, ADU, 7A)

28,00 €

FCP 7mm lash cap for solid lifter

Part number FCPLC/7mm.
FCP Engineering lash cap used with solid lifter.
hardness HRC 55, inner diameter 7mm, over deck 5mm.

4,00 €

Audi/VW VWIVN-1034 standard 1.8 2.0 2.2 intake valve

Audi / VW 1.8-2.0 16V 2.2T 20V Supertech intake valve VWIVN-1034 STD

Product detailed specification
Model number	VWIVN-1034
Head diameter	32.00mm
Stem diameter	6.95mm
Length	95.50mm
Material	Black nitrided stainless steel
Fits for	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A)

28,00 €

Audi / VW 1.8-2.0 16V 2.2T 20V Supertech intake valve VWIVN-1035 +0.5mm

Product detailed specification
Model number	VWIVN-1035
Head diameter	32.50mm
Stem diameter	6.95mm
Length	95.50mm
Material	Black nitrided stainless steel
Fits for	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A)

28,00 €

Audi / VW 1.8-2.0 16V 2.2T 20V Supertech intake valve VWIVN-1038 +2mm

Product detailed specification
Model number	VWIVN-1038
Head diameter	34.00mm
Stem diameter	6.95mm
Length	95.50mm
Material	Black nitrided stainless steel
Fits for	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A)

28,00 €

Audi S2 RS2 S4 S6 2.5 20V Stroker (stroke 92.8) JE Pistons 83mm CR 8.5 301937

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-15.0cm³
Compression height (CH)	29.59mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; FSR series skirt
Fits for	AUDI - 2.2T 20V Stroker (Stroke 92.8mm)

1 099,00 €

VW 1.8 2.0 16V KR PL ABF Athena MLS head gasket 83.8x1.4mm 338004R

Athena Racing 338-series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338004R
Gasket thickness: 1.40mm
Bore size: 83.80mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

139,00 €

VW / Audi 1.8 2.0 16V KR PL 9A ABF FCP valve double springs kit

VW / Audi 1.8 2.0 16V KR PL 9A ABF ACE FCP valve spring set

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome silicone steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
16 pcs. outer springs
16 pcs. inner springs
Fits all 4 cylinder 1.8 2.0 16V VW / Audi engines KR, PL, 9A, ABF, ACE.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can also be used together with standard or FCP titanium retainers.

199,00 €

Audi/VW 1.8 2.0 8V, 2.0 16V ABF 2E FCP cтальные шатуны 159mm X профиль

Подробная спецификация продукта:

Производитель: FCP Engineering
Модель: FCPRXVW15950621-4
Профиль: профиль X (Смазочный канал от большого конца до поршневого пальца)
С на С: 159mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 21mm
Количество: 4 шт., 8 шт. ARP2000 3/8" болты
Made of: forged steel 4340 EN24er
Максимальная рекомендуемая мощность: 1000HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Audi / VW 1.8 8V, 2.0 8V, 2.0 16V двигатели с блоком 236мм (ABF, ABA, AAD, 2E)

549,00 €

Audi / VW 1.6 1.8 2.0 ACL Race connecting rod bearings 4B1606H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram (Top View)

Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applications, 1983-2003)

72,00 €

Audi / VW 1.6 1.8 2.0 ACL гоночная серия шатунные подшипники 4B1606HX-STD

ПОДШИПНИКИ ДВИГАТЕЛЯ
	КОМПЛЕКТ ПОДШИПНИКОВ
	Part#
	4B1606H	4B1606HX
Размеры	STD, .025, .25, .50	STD
Масло оформление	стандарт	+ 0.001" Extra
Половина Типа	Одинаковые половинки
Mатериал	Триметал. закаленные стальные спинки
Мин. Cтан. размер вала	1.8802" /47.758mm
Макc. Cтан. размер вала	1.8810" /47.778mm
Мин. Cтан. размер туннеля	1.9921" /50.600mm
Макc. Cтан. Размер туннеля	1.9929" /50.619mm
Максимальная толщина	0.0553" / 1.405mm	0.0548" /1.392mm
Макс. общая длина	0.748" / 19.00mm
Примечания	Подшипник имеет масляное отверстие 1,65 мм
Diagram (Top View)

Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applicatons, 1983-2003)

72,00 €