В корзине нет товаров
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.777 / 47.757 | ||||||
| Housing | 50.599 / 50.620 | ||||||
| Max Wall | 1.402 | ||||||
| Max Length | 18.971 |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.777 / 47.757 | ||||||
| Housing | 50.599 / 50.620 | ||||||
| Max Wall | 1.402 | ||||||
| Max Length | 18.971 |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
20 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
95.50mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-11.90cm3 |
|
Compression height (CH) |
29.24mm |
|
Pin diameter |
22mm |
|
Features |
Tuff coated piston skirt, HD Pins |
|
Fits for |
5 cylinder Audi - 2.5T 20V Stroker |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
95.50mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-11.90cm3 |
|
Compression height (CH) |
29.24mm |
|
Pin diameter |
22mm |
|
Features |
Tuff coated piston skirt, HD Pins |
|
Fits for |
5 cylinder Audi - 2.5T 20V Stroker |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF) |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.0:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-15.00cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi 2.7T 30V (AZR, ASJ, AZF) |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.50:1 |
|
OEM compression ratio (CR) |
9.30:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V Turbo |
| Engine Nr | |
|---|---|
| Application | |
| Bolt Size | |
| Shape | |
| Length (CC) | |
| Pin Size | |
| Big Bore | |
| B.E Width | |
| Weight Gr. | |
| Set of | |
| Fastener Grade | |
| Series | |
| Weight |
|
Product detailed specification |
|
|
Bore size |
80.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
7.00:1 |
|
OEM compression ratio (CR) |
7.00:1 |
|
Dome volume (CC) |
-33.4 |
|
Compression height (CH) |
40.60mm |
|
Pin diameter |
22mm |
|
Fits for |
Audi 2.1 /2.2 20V Turbo |
|
Product detailed specification |
|
|
Bore size |
80.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
7.00:1 |
|
OEM compression ratio (CR) |
7.00:1 |
|
Dome volume (CC) |
NA |
|
Compression height (CH) |
40.60mm |
|
Pin diameter |
22mm |
|
Fits for |
Audi 2.1 /2.2 20V Turbo |
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-7.60cm3 |
|
Compression height (CH) |
32.80mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; FSR series skirt |
|
Fits for |
Audi - 2.2 20V Turbo (3B, ABY, ADU, AAN) |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHA15550620-5
Профиль: профиль H
С на С: 155mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 20mm
Количество: 5 шт., 10 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 800HP (5 цилиндров)
Advertised RPM rating: 9000RPM
Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Строкер
Настройка двигателя: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons
Подробная спецификация продукта:
Производитель: FCP Engineering
