В корзине нет товаров
|
Product detailed specification |
|
|
Bore size |
86.25mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
9.1-9.25:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-12cm3 |
|
Compression height (CH) |
32.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous |
|
Fits for |
Nissan 180SX, 200SX (S13, S14) 2.0 16V (SR20DET) |
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.976 / 51.956 | ||||||
| Housing | 55.001 / 55.014 | ||||||
| Max Wall | 1.501 | ||||||
| Max Length | 17.000 |
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.976 / 51.956 | ||||||
| Housing | 55.001 / 55.014 | ||||||
| Max Wall | 1.501 | ||||||
| Max Length | 17.000 |
|
Product detailed specification |
|
|
Bore size |
96.00mm |
|
Stroke |
81.40mm |
|
Wiseco compression ratio (CR) |
8.8:1 |
|
OEM compression ratio (CR) |
10.3:1 |
|
Dome volume (CC) |
-10cm3 |
|
Compression height (CH) |
29.67mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous |
|
Fits for |
Nissan 350Z, Maxima - 3.5 24V (VQ35DE) |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHN14425522
Профиль: профиль H
С на С: 144.20mm
Диаметр отверстия нижней головки: 55mm
Диаметр пальца: 22mm
Количество: 6 шт., 12 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 1000HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
Nissan 350Z - 3.5 (VQ35DE)
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHN1655923
Профиль: профиль H
С на С: 165mm
Диаметр отверстия нижней головки: 59mm
Диаметр пальца: 23mm
Количество: 6 шт., 12 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность 1000HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
Nissan GT-R - 3.8 24V V6 Twin Turbo (VR38DETT)
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338406R + 338407R
Gasket thickness: 0.95mm
Bore size: 100.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
95.51mm |
|
Stroke |
88.40mm |
|
Mahle motorsport compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-4cm3 |
|
Compression height (CH) |
34.25mm |
|
Pin diameter |
23mm |
|
Features |
PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications |
|
Fits for |
Nissan GT-R - 3.2 (V38DETT) |
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 88Lbs@34.20mm (seat)
Spring coil bind: 20.70mm
Max lift: 14.00mm
Rate: 12.10Lbs/mm
Set includes:
Dual springs: 24 pcs. SPR-TS1015-GTR
Titanium retainers: 12 pcs. RET-TS5.5-T8 (intake) & 12 pcs. RET-TS5.5-T9F (exhaust)
Seats: 12 pcs. SEAT-TS-GTR2 (intake) & 12 pcs. SEAT-TS-GTR (exhaust)
