ENGINE BEARINGS | ||
CON ROD BEARING SET |
||
Part# | ||
4B1606H |
4B1606HX |
|
Sizes | STD, .025, .25, .50 | STD |
Oil Clearance | Standard | + 0.001" Extra |
Half Type | Identical Halves | |
Material |
Tri-metal Hardened steel backs |
|
Min Std Shaft Size |
1.8802" /47.758mm |
|
Max Std Shaft Size |
1.8810" /47.778mm |
|
Min Std Tunnel Size |
1.9921" /50.600mm |
|
Max Std Tunnel Size |
1.9929" /50.619mm |
|
Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
Max Overall Length |
0.748" / 19.00mm |
|
Notes | Bearing has 1.65mm oil hole at crown | |
Diagram |
|
Engines Audi 2.2 2.3 20V (incl. Turbo) S2, RS2, 200, S4, S6. 3B, 7A, AAN, ADU, ABY
Product detailed specification |
|
Bore size |
83.50mm |
Stroke |
92.80mm |
JE Pistons compression ratio (CR) |
9.5:1 |
OEM compression ratio (CR) |
10.0:1 |
Dome volume (CC) |
-8.80cm3 |
Compression height (CH) |
29.60mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; FSR Series coated skirt |
Fits for |
Audi TTRS 2.5 20V TFSI |
ENGINE BEARINGS | ||
MAIN BEARING SET |
||
Part# | ||
5M1644H |
5M1644HX |
|
Sizes | STD, .25, .50 | STD |
Oil Clearance | Standard | + 0.001" Extra |
Half Type | Upper & Lower | |
Material | Tri-metal | |
Min Std Shaft Size | 2.1243in / 53.958mm | |
Max Std Shaft Size | 2.1251in / 53.978mm | |
Min Std Tunnel Size | 2.3228in / 59.000mm | |
Max Std Tunnel Size | 2.3236in / 59.019mm | |
Max Wall at Crown | 0.0985in / 2.502mm | 0.0980in / 2.489mm |
Max Overall Length | 0.728in / 18.49mm | |
Notes | Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower. | |
Diagram |
|
Part number 14-32049-01
Victor Reinz cylinder head bolt kit
Audi S2, RS2, S4, S6 - 2.2T 20V
Clutch disc with special organic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.9x24.3-23N
Transmittable torque: 520Nm
Manufacturer compare numbers:
Audi
050 141 117 E
074 141 117 G
074 141 117 H
077 141 117 L
078 141 117
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.
Product detailed specification
Manufacturer: FCP EngineeringDirect replacement Single-mass flywheel made from Alloy steel (16MnCr5)
Used with aftermarket 240mm clutch kit.
Weight - 5kg.
Can be used with Sachs Performance clutch cover 883082999707
Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027