BMW (20)

BMW M3 E46 3.2 S54B32 Supertech valve spring set SPRK-2521-2BM-T1

Spring data:
Seat pressure - 82lbs @ 41.00mm
Open (lift) pressure - 186lbs @ 10.00mm
Spring coil bind - 25.50mm
Max lift - 15.50mm
Rate - 10.00mm
Outer spring outer diameter - 26.40mm
Outer spring inner diameter - 19.30mm
Inner spring outer diameter - 19.30mm
Inner spring inner diameter - 14.50mm

Set includes:
Double springs - 24 pcs. SPR-2521-BM
Titanium retainers - 24 pcs. RET-BM2521-T1
Seats - 24 pcs. SEAT-BMS54

€1,100.00

BMW 2.0 2.5 2.8 3.0 M50 Athena Cooper Ring cylinder head gasket 86x2mm 330013R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330013R
Gasket thickness: 2.00mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

BMW M5 S63B44 Supertech Intake / Exhaust Valve seal VSI-EC60E

€3.00

Boostline Conrod Set BMW / Toyota B58B30 148.18mm 625+ BM5834-866+

Purpose-Built For Boost High Boost and BMW B58B30 Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1500 HP
3/8 x 1.600 in. ARP CA625+ Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€2,399.00

BMW M3 E30 S14B20 ACL Race connecting rod bearings 4B1489H-0.25

€109.00

BMW 3er / M3 / M4 N55B30 S55B30 Ferrea exhaust valve STD F2428P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

Cometic BMW 1.8 1.9 M42 M44 MLS cylinder head gasket 86x3mm C4349-120

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€299.00

BMW 3.0 N54B30 N55B30 S55B30 ACL Race Series main bearings 7M1397H-0.25

€249.00

BMW 3.2 S54B32 Athena Racing head gasket 87.50x1.2mm 330037R

BMW M3 E46 3.2 S54B32 Athena Cooper Ring cylinder head gasket 87.5x1.2mm 330037R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

BMW M3 E36 3.0 3.2 S50B30 S50B32 EURO ARP cylinder head stud kit 201-S50B30/B32

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€353.00

BMW 2.0 M50B20TU M52B20 M52B20TU FCP steel con rods 145mm

BMW 2.0 M50B20TU M52B20 M52B20TU FCP H-beam steel connecting rods 145mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHB1454822-6
Profile: H-beam
C to C: 145mm
Big end diameter: 48mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. 3/8" ARP2000 bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW E34, E36, E39, E46 - 2.0 (M50B20TU, M52B20, M52B20TU)

€639.00

BMW N62/N63/S63B44 (-2011) King Racing Connecting rod bearings CR8049GPC

Upper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SV	SV	8		53.99 / 53.97	57.61 / 57.60	14.8	1.796

€209.00