BMW (4)

BMW ARP2000 S14 E30 M3 connecting rods bolts

BMW M3 E30 2.3 S14 ARP2000 connecting rod bolt kit M11 201-6104

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€190.00

BMW 2002 1.8 2.0 M10 ARP cylinder head stud kit 201-4601

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€268.00

BMW M50B25 M52B25 TURBO FCP Forged pistons 84.50mm CR 8.5:1

BMW 2.5 M50B25 M52B25 TURBO FCP Forged pistons 84.50mm CR 8.5

Part number: FCPPB845085M50
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 84.50mm
Compression ratio (CR): 8.5:1
Compression height: 32.50 mm
Pin diameter: 22mm
Stroke: 75.00mm
BMW 325 525 Turbo (M50B25, M52B25TU)
Connecting rod length must be 140mm

€1,169.00

BMW M3 M4 3.0L S58 Athena Cooper Ring cylinder head gasket 85x1mm 330213R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

BMW 2.0 Turbo N20B20 FCP H-beam steel connecting rods 144.3mm for aftermarket...

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB144353622-4
Profile: H-beam
C to C: 144.3mm
Big end diameter: 53.6mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (4 cylinder)
Advertised RPM rating: 9000RPM
Fits aftermarket pistons

€439.00

BMW M5 E39 S62B50 ACL Race connecting rod bearings 8B1591H-0.25

€249.00

BMW / Mini 2.0 B48 Supertech valve spring kit SPRK-MCB48

Seat pressure - 75lbs @ 37mm
Open (lift) pressure - 155lbs @ 10mm
Spring coil bind - 23.20mm
Rate - 8lbs/mm
Max lift - 12.20mm
Outer spring outer diameter: 24.40mm
Outer spring inner diameter: 17.60mm
Inner spring outer diameter: 21.00mm
Inner spring inner diameter: 14.20mm

Set includes:
Dual springs: 16 pcs. SPR-FE20BE
Titanium retainers: 8 pcs. RET-BMB48/TE and 8 pcs. RET-BMB48/TI

€760.00

Cometic BMW 5.0 V10 S85B50 MLS cylinder head gasket set 94.5x1.3mm C4529-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€399.00

BMW M3 S65 4.0 32V V8 Supertech valve spring set SPR-BMS65-BE1

Spring data:
Seat pressure - 77lbs @ 40.10mm
Open (lift) pressure - 180lbs @ 10.00mm
Spring coil bind - 27.00mm
Max lift - 12.20mm
Rate lbs/mm - 10.30mm
Outer diameter - 26.50mm/18.70mm
Inner diameter - 21.60mm/13.80mm

Set includes:
Beehive springs - 32pcs. SPR-BMS65

€599.00

BMW 135i 335i N55B30 S55B30 FCP H-beam steel connecting rods 144.3mm for oem...

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB144353622T
Profile: H-beam
C to C: 144.3mm
Big end diameter: 53.6mm
Pin diameter: 22mm (Tapered small end)
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW 135i E82/E88, M135i F20, M235i F22/F23, 335i E90/E91/E92/E93, 335i F30/F31, 435i F32/F33/F36, 535i F10/F11, 640i F12/F13, 740i F01, X1 E84, X3 F25, X4 F26, X5 E70, X5 F15, X6 E71, X6 F16, 335 GT F34, 535 GT F07
Fits OEM pistons

€639.00

BMW V8 S63B44 FCP H-beam steel connecting rods 138.2mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHBS63B44
Profile: H-beam
C to C: 138.2mm
Pin diameter: 22mm
Quantity: 8 pcs., 16 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1200HP (8 cylinder)
Advertised RPM rating: 9000RPM
BMW M5 F10 - 4.4 V8 (S63B44)

€1,099.00

BMW 3.0 N54B30 / N55B30 / S55B30 Supertech conical spring kit SPRK-FE20N54-BE

Spring data:
Seat pressure - 75lbs @ 36.50mm
Open (lift) pressure - 155lbs @ 10.00mm
Spring coil bind - 23.20mm
Max lift - 12mm
Rate - 8 lbs./mm
Wide end spring outer diameter - 24.40mm
Wide end spring inner diameter - 17.60mm
Narrow end spring outer diameter - 21.00mm
Narrow end spring inner diameter - 14.30mm

Kit includes:
Single springs - 24 pcs. SPR-FE20N54-BE
Rretainers - 12 pcs. RET-BMN54-TI (5mm)
Retainers - 12 pcs. RET-BMN54-TE (6mm)

€1,149.00