There are no items in cart
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 1.889in / 47.98mm |
| Max. Std Shaft Size | 1.8898in / 48mm |
| Min. Std Tunnel Size | 2.008in / 51.004mm |
| Max. Std Tunnel Size | 2.0088in / 51.024mm |
| Max Wall at Crown | 0.0591in / 1.5mm |
| Max Overall Length | 0.6063in / 15.40mm |
| Weight | 0.12 |
| Notes | 0 |
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.3616in / 59.984mm |
| Max. Std Shaft Size | 2.3622in / 60.000mm |
| Min. Std Tunnel Size | 2.5197in / 64.000mm |
| Max. Std Tunnel Size | 2.5205in / 64.020mm |
| Max Wall at Crown | 0.0789in / 2.005mm |
| Max Overall Length | 0.7480in / 19.00mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.8642in / 21.95mm (8299H/HX - Flange) |
| Weight | 0.31 |
| Notes | Thrust in #3 pos. |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 51.999mm |
| Min. Std Tunnel Size | 2.1654in / 55.001mm |
| Max. Std Tunnel Size | 2.1663in / 55.024mm |
| Max Wall at Crown | 0.0589in / 1.496mm |
| Max Overall Length | 0.7677in / 19.5mm |
| Weight | 0.33 |
