Clutches

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00

Opel / Vauxhall 2.0 Z20LET Z20LEH FCP racing valve spring kit with retainers...

Valve springs data
Installed seat pressure - 30kg
Lift - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
16 pcs. seats
Fits Opel / Vauxhall 4 cylinder 2.0 16V X20XE, Z20LET, Z20LEH engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€449.00

VW 2.0 16V ABF Wiseco pistons CR 8.5 82.5mm KE188M825

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11cm³
Compression height (CH)	30.60mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	VW / Seat - 2.0 16V ABF

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

BMW M3 E46 3.2 S54B32 King Racing connecting rod bearings CR6877XPC-0.5 Coated

Position

Connecting rod:
1, 2, 3, 4, 5, 6

Pairs
&
Part Numbers

XP	XP

C6877-PR	C6877-PR

Quantity

6

Crankshaft Diameter

48.992 / 48.974mm

Housing Diameter

53.000 / 53.015mm

Max Wall Thickness

1.994mm

Max Length

16.002mm

Engines BMW 3.2 (S54B32)

€199.00

Audi / VW R32 R36 24V Ferrea exhaust valve STD (short) F2289P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

Audi 2.2 20V turbo S2 RS2 Wossner pistons 81.50mm CR 8.0 K9201D050-5

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.00:1
OEM compression ratio (CR)	9.30:1
Dome volume (CC)	-12.30cm³
Compression height (CH)	33.40mm
Pin diameter	20mm
Fits for	Audi 2.2 20V Turbo (3B, ABY, ADU, AAN)

€1,099.00

Mitsubishi EVO 2.0 16V 4G63 Supertech valve springs kit SPRK-M1005D

Spring data:
Seat pressure 80lbs@39.60mm
Max lift. 16.00mm
Rate 10.50lbs/mm
Spring coil bind 23.50mm

Set includes:
Dual springs: 16 pcs. SPR-M1005D
Titanium retainers: 16 pcs. RET-M65-T1
Seats: 16 pcs. SEAT-M1007D
Valve seals: 16pcs. VS-H6.6E

€625.00

Audi / VW 1.8T 20V AEB Athena MLS cylinder head gasket 82x1.35mm 338463R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338463R
Gasket thickness: 1.35mm
Bore size: 82mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€145.00

BMW 2.5 12V M20B25 Wiseco pistons CR 8.8 84.5mm KE317M845AP

Product detailed specification
Bore size	84.50mm
Stroke	75.00mm
Wiseco compression ratio (CR)	8.8:1
OEM compression ratio (CR)	8.8:1
Dome volume (CC)	-6.8cm³
Compression height (CH)	34.70mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	BMW - 2.5 12V (M20B25)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,229.00

VW / Audi 2.0 16V TSI TFSI FCP valve spring and titanium retainer kit

Spring data:
Seat pressure - 82lbs @ 37.00mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 24.90mm
Max lift - 11.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 16 pcs.
Titanium retainers - 16pcs.

€449.00

Audi S4 RS4 3.0 V6 Biturbo Stroker FCP forged piston kit 82mm CR 8.5

Part number: FCPPA820085RS4STR
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 27.50 mm
Pin diameter: 21mm
Stroke: 92.80mm
Audi S4 RS4 - 3.0 30V Stroker Biturbo

€1,169.00

Cometic Subaru WRX STI 2.0 16V EJ20GN EJ205 MLS cylinder head gasket kit...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€159.00