Clutches

Subaru BRZ 2.0 FA20 / Toyota GT86 2.0 4U-GSE Athena MLS cylinder head gasket...

Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€149.00

Cometic BMW M10B18 M10B20 SOHC 8V 72-88 MLS cylinder head gasket 90x1.27mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€205.00

Cometic BMW 3.4 M30B34 1982-93' MLS cylinder head gasket 93x2.49mm C4477-098

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€325.00

Cometic Porsche 996TT 3.6L 01-04' MLS cylinder head gasket set 102x1mm C4492-040

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

€265.00

Nissan Supertech 6mm intake valve stem seal VS-N6I

Supertech intake valve seals are made from a high quality rubber compound (Viton).

€2.00

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

€109.00

Audi RS6 C7, RS7 4.0 V8 TFSI BITURBO forged JE Pistons 84.50mm CR 9.5

Product detailed specification
Bore size	84.50mm
Stroke	89.00mm
JE Pistons compression ratio (CR)	9.5:1
Dome volume (CC)	-8.1cm³
Compression height (CH)	30.61mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; HD pins
Fits for	Audi S6, S7, S8, RS6 C7, RS7 - 4.0 TFSI V8 Biturbo

€2,699.00

Cometic BMW N63B44 S63B44 MLX cylinder head gasket set 90x1mm C15475-040

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

€399.00

Ford Zetec 2.0 16V Spertech exhaust valve FEVN-1035 STD

Product detailed specification
Model number	FEVN-1035
Head diameter	28.00mm
Stem diameter	6.012mm
Length	96.70mm
Material	Black nitrited
Fits for	Ford / Mazda - 2.0 16V (Zetec)

€33.00

BMW M5 M6 5.0 S85 V10 ARP Custom age connecting rod bolt kit M9 201-6002

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€760.00

BMW 6 cylinder 2.3 2.5 3.0 N52 N53 N54 N55 S55 Mahle main bearings

For bearing clearance from [mm]: 0,018
To bearing clearance [mm]: 0,068
For housing diameter from [mm]: 61,000
To housing diameter [mm]: 61,019
Width from [mm]: 23,86
Width to [mm]: 23,96
For wall thickness from [mm]: 2,500
To wall thickness [mm]: 2,506
For shaft diameter from [mm]: 55,951
To shaft diameter [mm]: 55,970

€99.00

Toyota Supra 3.0 7M-GTE ARP main stud kit (2-bolt) 203-5402

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€260.00