Klicken Sie hier um alte Website-Version zu öffnen
Alle Kategorien
Parts by Car
Go
Parts by Car
Go
Teile nach:
Kategorie

Toyota

Kolbenschmidt plastigage Meßstreifen für Gleitlager 120000417001
Teilenummer 50009880.
Kolbenschmidt Plastigage Meßstreifen Gleitlager Kit (10 Stk.).
Messstreifen zur Bestimmung des Lagerspiels bei Gleitlager.
18,00 €
ACL Meßstreifen für Gleitlager / Flexigauge AG-1 (Grün)
1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.
16,00 €
ACL Meßstreifen für Gleitlager / Flexigauge AR-1 (Rot)
1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.
16,00 €
Toyota 2.5 3.0 2JZGTE ACL Race Pleuellager Satz 6B8100H-STD
Sizes STD, .025, .25
Oil Clearance Standard
Half Type Identical halves
Material Tri-metal Hardened steel backs
Min. Std Shaft Size 2.0465in / 51.981mm
Max. Std Shaft Size 2.0472in / 52mm
Min. Std Tunnel Size 2.1663in / 55.024mm
Max. Std Tunnel Size 2.167in / 55.042mm
Max Wall at Crown 0.0593in / 1.506mm
Max Overall Length 0.7598in / 19.3mm
Weight 0.253
Notes 0
109,00 €
Toyota 1UZ/2UZ/3UZ-FE ACL Race Pleuellagersatz 8B8091H-STD
Oil Clearance Standard
Half Type Identical Halves
Material Tri-metal Hardened steel backs
Min. Std Shaft Size 2.0465in / 51.981mm
Max. Std Shaft Size 2.0472in / 51.999mm
Min. Std Tunnel Size 2.1654in / 55.001mm
Max. Std Tunnel Size 2.1663in / 55.024mm
Max Wall at Crown 0.0589in / 1.496mm
Max Overall Length 0.7677in / 19.5mm
Weight 0.33
145,00 €
Toyota 2.5 3.0 2JZGTE ACL Race Pleuellager Satz 6B8100HX-STD
ENGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
6B8100H

6B8100HX

 
Sizes STD, .025, .25 STD
Oil Clearance Standard + 0.001" Extra
Half Type Identical halves
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

2.0465in / 51.981mm

Max Std Shaft Size

2.0472in / 52mm

Min Std Tunnel Size

2.1663in / 55.024mm

Max Std Tunnel Size

2.167in / 55.042mm

Max Wall at Crown

0.0593in / 1.506mm

0.0588in / 1.493mm

Max Overall Length

0.7598in / 19.3mm

Notes

Diagram       
(Top View) 

6B8100H.jpg
Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)
109,00 €
1 2 3 4