Toyota

Kolbenschmidt plastigage Meßstreifen für Gleitlager 120000417001

Teilenummer 50009880.
Kolbenschmidt Plastigage Meßstreifen Gleitlager Kit (10 Stk.).
Messstreifen zur Bestimmung des Lagerspiels bei Gleitlager.

18,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AG-1 (Grün)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick Montageschmierstoff für Motorlager 118ml (1 Stk.)

18,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AR-1 (Rot)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Toyota 2.5 3.0 2JZGTE ACL Race Pleuellager Satz 6B8100H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

109,00 €

Subaru BRZ FA20 / Toyota 4U-GSE ACL Pleuellager Satz 4B8310H

79,00 €

Toyota 2.0 3S-GE 3S-GTE ACL Race Pleuellager Satz 4B8366H

72,00 €

Toyota 2.8 3.0 5M-GE 7M-GE/7M-GTE ACL Duraglide Pleuellager Satz 6B1170-STD

75,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series Pleullagersatz 6B1510H-STD

209,00 €

Toyota 1UZ/2UZ/3UZ-FE ACL Race Pleuellagersatz 8B8091H-STD

Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 51.999mm
Min. Std Tunnel Size	2.1654in / 55.001mm
Max. Std Tunnel Size	2.1663in / 55.024mm
Max Wall at Crown	0.0589in / 1.496mm
Max Overall Length	0.7677in / 19.5mm
Weight	0.33

145,00 €

Toyota 1.8 16V 2ZZ-GE ACL Race Pleuellager Satz 4B1856H-STD

109,00 €

Ajusa Ajulube Montageschmierstoff für Motor 100ml 1pc.

15,00 €