В корзине нет товаров
Part number 14-32052-01
Victor Reinz cylinder head bolt kit (M11)
Audi / Seat / Skoda / VW - 1.8T 20V
Spring data:
Seat pressure - 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 190lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm
Set includes:
Single springs - 16 pcs. SPR-A2416
Spring data:
Seat pressure - 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 109lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm
Set includes:
Single springs - 20 pcs. SPR-A2416
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
Wiseco compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-14cm3 |
|
Compression height (CH) |
29.50mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA14450623T-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
20 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
