В корзине нет товаров
|
Product detailed specification |
|
|
Bore size |
79.00mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-3.50cm3 |
|
Compression height (CH) |
28.00mm |
|
Pin diameter |
19mm |
|
Fits for |
Opel 1.6 (Z16LER) |
|
Product detailed specification |
|
|
Bore size |
79.50mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
11.5:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
+3.50cm3 |
|
Compression height (CH) |
28.20mm |
|
Pin diameter |
18mm |
|
Fits for |
Opel 1.6 16V (X16XEL / C16XE) |
|
Product detailed specification |
|
|
Bore size |
79.50mm |
|
Stroke |
81.50mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-3.50cm3 |
|
Compression height (CH) |
28.00mm |
|
Pin diameter |
19mm |
|
Fits for |
Opel 1.6 16V (Z16LER) |
Part number VS-N7E.
Supertech valve seal (intake and exhaust) for 7mm valve stem.
Guide outer diameter -11.03mm.
Seal outer diameter - 14.00mm.
For Opel / Vauxhall - 2.0 16V (C20XE, C20LET)
|
Product detailed specification |
|
|
Model number |
GEVI-3312S |
|
Head diameter |
29.50mm |
|
Stem diameter |
5.95mm |
|
Length |
92.30mm |
|
Material |
Inconel |
|
Fits for |
For Opel - 2.0 16V (Z20LET, Z20LEH) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338286R
Gasket thickness: 1.50mm
Bore size: 87.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Lifter data:
Outer diameter - 31.97mm
Inner diameter - 30.00mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 40g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-16.90cm3 |
|
Compression height (CH) |
30.50mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR series skirt |
|
Fits for |
Opel 2.0 16V (C20LET, C20XE) |
| NGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
86.00mm |
|
Wossner compression ratio (CR) |
8.8:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-20.50cm3 |
|
Compression height (CH) |
30.40mm |
|
Pin diameter |
21mm |
|
Fits for |
Opel 2.0 16V (Z20LET, Z20LEH, Z20LER, Y20LET) |
