Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Volvo

Volvo 2.0 2.3 ACL Race švaistikliniai indėklai 4B2726H-STD
 ENGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2726H



 
Sizes STD
Oil Clearance Standard
Half Type Identical Halves
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9285in / 48.984mm

Max Std Shaft Size

1.9293in / 49.004mm

Min Std Tunnel Size

2.0472in / 51.999mm

Max Std Tunnel Size

2.0478in / 52.014mm

Max Wall at Crown

0.0585in / 1.486mm

Max Overall Length

0.945in / 24.00mm

Notes

Diagram       
(Top View) 

2726H_000.jpg
Engines Volvo - 2.0 2.3 (B200, B204, B230, B234)
119,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

15,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR