Opel / Vauxhall

показывать:

Сортировать по:

Opel 2.8 Z28NEL Z28NET ACL Race Series connecting rod bearings 6B2270H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.204in / 55.992mm
Max. Std Shaft Size	2.205in / 56.008mm
Min. Std Tunnel Size	2.347in / 59.620mm
Max. Std Tunnel Size	2.348in / 59.636mm
Max Wall at Crown	0.0708in / 1.798mm
Max Overall Length	0.7303in / 18.55mm

149,00 €

Opel 2.8 Z28NEL Z28NET ACL Race Series connecting rod bearings 6B2270H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.204in / 55.992mm
Max. Std Shaft Size	2.205in / 56.008mm
Min. Std Tunnel Size	2.347in / 59.620mm
Max. Std Tunnel Size	2.348in / 59.636mm
Max Wall at Crown	0.0708in / 1.798mm
Max Overall Length	0.7303in / 18.55mm

149,00 €

Opel 2.8 Z28NEL Z28NET ACL Race Series main bearings 4M2273H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.6769in / 67.992mm
Max. Std Shaft Size	2.6775in / 68.008mm
Min. Std Tunnel Size	2.8687in / 72.866mm
Max. Std Tunnel Size	2.8694in / 72.882mm
Max Wall at Crown	0.0954in / 2.422mm
Max Overall Length	0.7776in / 19.75mm (2273H/HX) 0.9563in / 24.29mm (2274H/HX -3 Piece Flange)

299,00 €

Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-0.50

NGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2322H	4B2322HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9280in / 48.971mm
Max Std Shaft Size	1.9286 in / 48.987mm
Min Std Tunnel Size	2.0472in / 52.000mm
Max Std Tunnel Size	2.0477in / 52.012mm
Max Wall at Crown	0.0591in / 1.500mm	0.0596in / 1.513mm
Max Overall Length	0.760in / 19.30mm
Notes	Upper rod bearing has two oil holes to cover early and late engines.
Diagram (Top View)

Engines Opel 4 cylinder 1.8 2.0 2.2 2.4

75,00 €

Opel 2.0 2.2 2.4 Ecotec ACL Race connecting rod bearings 4B2296H-STD

85,00 €

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

1 2