В корзине нет товаров
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
90.30mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.0:1 |
|
Dome volume (CC) |
-26.2cm3 |
|
Compression height (CH) |
32.38mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
VW VR6 - 2.8 2.9 12V (AAA, ABV) |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applications, 1983-2003)
| Position | Connecting rod: 1, 2, 3, 4, 5, 6 |
||||||
|---|---|---|---|---|---|---|---|
| Pairs & Part Numbers |
|
||||||
| Quantity | 6 | ||||||
| Crankshaft Diameter | 48.992 / 48.974mm | ||||||
| Housing Diameter | 53.000 / 53.015mm | ||||||
| Max Wall Thickness | 1.994mm | ||||||
| Max Length | 16.002mm |
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338002R (2 pcs.)
Gasket thickness: 1.00mm
Bore size: 94.00mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
86.25mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
8.3:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-14.8cm3 |
|
Compression height (CH) |
34.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
12.5:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
5.2cm3 |
|
Compression height (CH) |
30.19mm |
|
Pin diameter |
21mm |
|
Features |
Asymmetrical FSR series |
|
Fits for |
Opel - 2.0 16V (C20XE) |
Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330062
Gasket thickness: 1.60mm
Bore size: 88.00mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
85.00mm |
|
Stroke |
88.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
8.3:1 |
|
Dome volume (CC) |
-12.50cm3 |
|
Compression height (CH) |
34.70mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
|
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRXA15457621
Профиль: профиль X (смазочный канал от большого конца до поршневого пальца)
С на С: 154mm
Диаметр отверстия нижней головки: 57.6mm
Диаметр пальца: 21mm
Количество: 6 шт., 12 шт. ARP2000 5/16" болты
Изготовлен из: кованой стали 4340 EN24er
Рекламируемый рейтинг мощности: 1200HP (6 цилиндр)
Объявленный рейтинг RPM: 9000RPM
Audi A6, Allroad - 2.6 2.8 V6; S4, Allroad - 2.7 V6 Biturbo
|
|
|||||||||||||
| Quantity | 1 | 6 | ||||||||||||
| Crankshaft | 59.990 / 59.972 | 59.990 / 59.972 | ||||||||||||
| Housing | 65.001 / 65.019 | 65.001 / 65.019 | ||||||||||||
| Max Wall | 2.494 | 2.494 | ||||||||||||
| Max Length | 24.940 | 19.901 |
