Cцепление (112)

Honda RSX-S 2.0 K20A/Z Wiseco forged pistons CR 12.4 86mm K650M86

Product detailed specification
Bore size	86.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	12.4:1
OEM compression ratio (CR)	11.7:1
Dome volume (CC)	10.5cm³
Compression height (CH)	30.00mm
Pin diameter	22mm
Features	Most Wiseco pistons have offset pins. Pins must be offset same as OEM for quitest operation. Utilizes extra deep valve pockets to expand the range of I-Vtec/Vanos with big/high lift cams and milled heads.
Fits for	Honda RSX-S - 2.0 (K20A/Z)

799,00 €

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 11.5 84mm 279949

Product detailed specification
Bore size	84.00mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-6.80cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

1 349,00 €

Opel 2.0 C20LET/XE Z20LET/LEH Mahle Original connecting rod bearings...

Bearings data:

Width: 20.30mm
Max Wall at Crown: 1.625mm
Min Std Shaft Size: 48.971mm
Max Std Shaft Size: 48.987mm
Min Std Tunnel Size: 52.000mm
Max Std Tunnel Size: 52.012 mm

29,00 €

Opel / Vauxhall 2.0 16V Z20LET ARP crankshaft main stud kit 209-Z20MSK

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

223,00 €

Subaru WRX 2.5 EJ25 EJ257 Athena Cooper Ring cylinder head gasket set...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330078R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 101.30mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

ARP VAG M8 X 1.25 X 51mm U/C exhaust manifold studs 400-8014

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

179,00 €

Audi / VW 2.0 16V TSI EA888 JE Pistons kit FSR coated CR 9.6 82.5mm 353839

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-7.1cm³
Compression height (CH)	29.60mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; coated FSR series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

899,00 €

Toyota Supra 3.0 2JZGTE Wiseco Pistons kit CR 9.7 87mm K677M87AP

Product detailed specification
Bore size	87.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	9.5:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-5.3cm³
Compression height (CH)	34.00mm
Pin diameter	5,72mm wall tool steel pins, 22mm
Features	HD2 Forging; FSR series piston skirt Pistons are with 1mm deeper valve pockets
Fits for	Toyota Supra - 3.0 (2JZGTE)

Wiseco HD2 pistons are specially designed for high-horsepower builds. Wiseco found the parts of pistons that fail when over-powered and beefed them up in those areas like the pin bore, ring lands, crown, etc. They also included a thicker wall pin that will stand up to more abuse than a standard pin. These pistons also come with Asymmetric Skirt AND is Gas Ported! This is definitely the piston to use if you are going to be pushing for big power.

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

1 199,00 €

Audi S4 / RS4 2.7 Biturbo steel 60-2 flywheel

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5) with 60-2 counter.
Used with 01E gearbox and Sachs Performance clutch kit.
Weight - 8.4kg.

Can be used with Sachs Performance clutch cover 883082999707

Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

499,00 €

BMW 2.0 2.5 2.8 3.0 M50 M52 M54 Turbo FCP cтальные шатуны 133mm профиль H

Подробная спецификация продукта:

Производитель: FCP Engineering
Модель: FCPRHB1334822-6
Профиль: профиль H
С на С: 133mm
Диаметр отверстия нижней головки: 48mm
Диаметр пальца: 22mm
Количество: 6 шт., 12 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 800HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
BMW - 2.0 2.5 2.8 3.0 3.2 (M50, M52, M54, S50 USA, S52 USA)
Used for turbo conversion with OEM pistons

639,00 €

BMW M3 E46 3.2 S54B32 24V FCP racing valve spring set

Valve springs data
Installed seat pressure - 40kg (88lbs)
Load - 100kg@12mm (220lbs@12mm)
Max lift - up to 13mm,
Made from chrome-silicon steel SAE9254-V
24 pcs. valve double springs
Fits BMW M3 - 3.2 24V (S54B32)
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Can be used together with standard retainers and seats.

399,00 €