Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

1.6 1.8 Z16 Z18 X16 X18

Opel 1.6 1.8 16V X16XE C16XE X18XE FCP steel connecting rods 129.75mm
Opel / Vauxhall 1.6 1.8 16V X16XE C16XE X18XE FCP H-beam steel connecting...
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRH129754618
Profile: H-beam
C to C: 129.75mm
Big end diameter: 46mm
Pin diameter: 18mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 1.6 1.8 (X16XE, C16XE, X18XE)
€399.00
Opel 1.6 TURBO Z16LET/LEL/LER/LEH FCP H-beam steel con rods 129.75mm
Opel / Vauxhall 1.6 Turbo Z16LET/LEL/LER/LEH FCP H-beam steel connecting rods...
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHO129754619
Profile: H-beam
C to C: 129.75mm
Big end diameter: 46mm
Pin diameter: 19mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 1.6 16V Turbo (Z16LET, Z16LEL, Z16LER, Z16LEH)
€399.00
Opel / Vauxhall 2.0 16V Z20LET Z20LEH FCP racing valve spring kit
Opel / Vauxhall 1.4 1.6 1.8 2.0 16V C20XE C20LET Z20LET FCP valve spring set
Valve springs data
Installed seat pressure - 30kg
Load - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
Fits Opel / Vauxhall 4 cylinder 1.4 1.6 1.8 2.0 16V engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.

€199.00
Opel GEVI-3320S +0.5mm 1.6 1.8 exhaust valve + 2 locks
Opel 1.6 1.8 Supertech Inconel exhaust valve GEVI-3320S STD + 2 locks

Product detailed specification

Model number

GEVI-3320S

Head diameter

27.50mm

Stem diameter

4.95mm

Length

113.15mm

Material

Inconel

Fits for

Opel - 1.6 1.8 (Z16LER, Z18LER, A18XER)

€46.00
Opel GIVN-3303F +1mm 2.0 intake valve
Opel 1.6 1.8 Supertech intake valve GIVN-3320S STD + 2 locks

Product detailed specification

Model number

GIVN-3320S

Head diameter

31.30mm

Stem diameter

4.96mm

Length

113.85mm

Material

Black nitrited

Fits for

Opel - 1.6 1.8 (Z16LER, Z18LER, A18XER)

€36.00
Opel/Vauxhall 1.6 X16XEL C16XE 79.00/79.50mm
Opel / Vauxhall 1.6 X16XEL C16XE Wossner pistons kit 79.50mm CR 11.5 K9141D050

Product detailed specification

Bore size

79.50mm

Stroke

81.50mm

Wossner compression ratio (CR)

11.5:1

OEM compression ratio (CR)

10.5:1

Dome volume (CC)

+3.50cm3

Compression height (CH)

28.20mm

Pin diameter

18mm

Fits for

Opel 1.6 16V (X16XEL / C16XE)

€749.00
Opel 1.6 1.8 A16 Z16 Athena MLS cylinder head gasket 80x1mm 338286R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338286R
Gasket thickness: 1.50mm
Bore size: 87.50mm

 

Part number starting with 338

Athena advantages

Optimized radius embossing shape

The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength

Advanced stopper technology

State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines

Coating technology

Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€199.00
Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-STD
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322HX-STD
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-0.25
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel 1.6 16V Turbo Z16LET FCP forged pistons 79mm CR 8.7

Product detailed specification

Bore size

79.00mm

Stroke

81.50mm

FCP compression ratio (CR)

8.7:1

OEM compression ratio (CR)

8.8:1

Compression height (CH)

28.10mm

Pin diameter

19mm

Fits for

1.6 16V Turbo (Z16LET, Z16LER)

€649.00
Opel 1.6 16V Turbo Z16LET FCP forged pistons 79.50mm CR 8.7

Product detailed specification

Bore size

79.50mm

Stroke

81.50mm

FCP compression ratio (CR)

8.7:1

OEM compression ratio (CR)

8.8:1

Compression height (CH)

28.10mm

Pin diameter

19mm

Fits for

1.6 16V Turbo (Z16LET, Z16LER)

€649.00
1 2