В корзине нет товаров
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Clutch disc with special organic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.9x24.3-23N
Transmittable torque: 520Nm
Manufacturer compare numbers:
Audi
050 141 117 E
074 141 117 G
074 141 117 H
077 141 117 L
078 141 117
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.2435in / 56.985mm |
| Max. Std Shaft Size | 2.2441in / 57.000mm |
| Min. Std Tunnel Size | 2.4016in / 61.000mm |
| Max. Std Tunnel Size | 2.4024in / 61.021mm |
| Max Wall at Crown | 0.0783in / 1.990mm |
| Max Overall Length | 0.8268in / 21.00mm |
| Notes | For engines equipped with thrust washers |
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
Подробная спецификация продукта:
Производитель: FCP Engineering
|
Product detailed specification |
|
|
Bore size |
85.50mm |
|
Stroke |
88.00mm |
|
Mahle compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
8.3:1 |
|
Dome volume (CC) |
-10cm3 |
|
Compression height (CH) |
34.70mm |
|
Pin diameter |
22mm |
|
Features |
4032 alloy |
|
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |
Подробная спецификация продукта:
Производитель: FCP Engineering
