Parts by engine (20)

BMW M5 M6 S85B50 V10 ACL Race Series connecting rod bearings 10B1580HX-STD

279,00 €

Cometic Toyota 7M-GTE 87-92' MLS cylinder head gasket 86x1.3mm C4275-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

245,00 €

Cometic Toyota 2.0 16V Turbo 3S-GE 3S-GTE 86-94' MLS cylinder head gasket...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

165,00 €

Cometic Porsche 924 / 924 Turbo 76-85' 2.0 MLS cylinder head gasket 88x1.27mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

169,00 €

BMW / Toyota 3.0 Turbo B58 Supertech valve spring kit SPRK-B58B

Springs data:
Seat pressure - 77lbs @ 40.10mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 27.00mm
Rate - 10.30lbs/mm
Max lift - 12.20mm
Outer spring outer diameter: 26.50mm
Outer spring inner diameter: 18.70mm
Inner spring outer diameter: 21.60mm
Inner spring inner diameter: 13.80mm

Set includes:
Dual springs: 24 pcs. SPR-FE20BE
Titanium retainers: 12 pcs. RET-BMB48/TE and 12 pcs. RET-BMB48/TI

1 140,00 €

ATHENA RACING CYLINDER HEAD GASKET SET FOR BMW M5 F10 V8 N63 S63 330073R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330037R
Gasket thickness: 1.10mm
Bore size: 90.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

459,00 €

BMW 335i 535i N55B30, M3 M4 S55B30 JE Pistons forged pistons 84.5mm CR 9.5...

Product detailed specification
Bore size	84.50mm
Stroke	89.60mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-14.7cm³
Compression height (CH)	32.40mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; coated FSR skirt
Fits for	BMW - 3.0 24V Turbo (N55B30, S55B30)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

1 349,00 €

Audi RS6 C7, RS7 4.0 V8 TFSI King Racing connecting rod bearings CR227XPC-STD...

299,00 €

Honda 2.0 2.4 K20 K24 Supertech exhaust valve HEVN-1021D +0.5mm

Product detailed specification
Model number	HEVN-1021D
Head diameter	30.50mm
Stem diameter	5.45mm
Length	108.65mm
Material	Black nitrited stainless steel
Fits for	Honda K20 K24

24,00 €

SACHS Performance ceramic clutch disc 228mm 881864999739

Clutch disc with ceramic friction material.
Diameter: 228mm
Number of teeth: 10
Hub profile: 23x29-10N
Transmittable torque: 600Nm
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 80% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.

Manufacturer compare numbers
BMW
0 670 024
0 670 025
1 203 149

329,00 €

Subaru 2.0 BRZ, Scion FR-S FA20 FA20D Supertech exhaust valve SEVI-1050 STD

Product detailed specification
Model number	SEVI-1050
_{Head diameter}	29.00mm
Stem diameter	5.45mm
Length	95.15mm
Material	Inconel
Fits for	Subaru BRZ, Scion FR-S - 2.0 (FA20, FA20D)

44,00 €

Audi S6 RS6 5.0 5.2 V10 TFSI FSI FCP valve spring kit + titanium retainers

Spring data:
Seat pressure - 70lbs @ 38.40mm (intake), 82lbs @ 37.00mm (exhaust)
Open (lift) pressure - 172lbs @ 10mm (intake), 180lbs @ 10mm (exhaust)
Max lift - 11.90mm (intake), 10.60mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 40pcs.
Titanium retainers - 40pcs.

1 099,00 €