В корзине нет товаров
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338406R + 338407R
Gasket thickness: 0.95mm
Bore size: 100.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
95.51mm |
|
Stroke |
88.40mm |
|
Mahle motorsport compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-4cm3 |
|
Compression height (CH) |
34.25mm |
|
Pin diameter |
23mm |
|
Features |
PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications |
|
Fits for |
Nissan GT-R - 3.2 (V38DETT) |
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 88Lbs@34.20mm (seat)
Spring coil bind: 20.70mm
Max lift: 14.00mm
Rate: 12.10Lbs/mm
Set includes:
Dual springs: 24 pcs. SPR-TS1015-GTR
Titanium retainers: 12 pcs. RET-TS5.5-T8 (intake) & 12 pcs. RET-TS5.5-T9F (exhaust)
Seats: 12 pcs. SEAT-TS-GTR2 (intake) & 12 pcs. SEAT-TS-GTR (exhaust)
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.1634in / 54.951mm |
| Max. Std Shaft Size | 2.1644in / 54.975mm |
| Min. Std Tunnel Size | 2.3089in / 58.645mm |
| Max. Std Tunnel Size | 2.3094in / 58.658mm |
| Max Wall at Crown | 0.0719in / 1.827mm |
| Max Overall Length | 0.7528in / 19.12mm (2394H/HX) 1.061in / 26.95mm (2395H/HX - Flange) |
| Weight | 0.41 |
| Notes | Flange in Position 4 |
