В корзине нет товаров
Lifter data:
Outer diameter - 31.97mm
Inner diameter - 30.00mm
Outer height - 26.30mm
Stem lenght - 14.70mm
Stud diameter - 7.00mm
Weight - 40g
24 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 48.986 / 48.971 | ||||||
| Housing | 51.999 / 52.012 | ||||||
| Max Wall | 1.496 | ||||||
| Max Length | 19.271 |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 48.986 / 48.971 | ||||||
| Housing | 51.999 / 52.012 | ||||||
| Max Wall | 1.496 | ||||||
| Max Length | 19.271 |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 48.986 / 48.971 | ||||||
| Housing | 51.999 / 52.012 | ||||||
| Max Wall | 1.496 | ||||||
| Max Length | 19.271 |
| Sizes | STD, .025, .25 |
| Oil Clearance | |
| Half Type | |
| Material | |
| Min. Std Shaft Size | 42,971 |
| Max. Std Shaft Size | 42,987 |
| Min. Std Tunnel Size | 46,000 |
| Max. Std Tunnel Size | 46,013 |
| Max Wall at Crown | 1.495 |
| Max Overall Length | 16.63 |
| Weight | 0.12 |
| Notes |
| Sizes | STD, .025, .25 |
| Oil Clearance | |
| Half Type | |
| Material | |
| Min. Std Shaft Size | 42,971 |
| Max. Std Shaft Size | 42,987 |
| Min. Std Tunnel Size | 46,000 |
| Max. Std Tunnel Size | 46,013 |
| Max Wall at Crown | 1.495 |
| Max Overall Length | 16.63 |
| Weight | 0.12 |
| Notes |
| Sizes | STD, .025, .25 |
| Oil Clearance | |
| Half Type | |
| Material | |
| Min. Std Shaft Size | 42,971 |
| Max. Std Shaft Size | 42,987 |
| Min. Std Tunnel Size | 46,000 |
| Max. Std Tunnel Size | 46,013 |
| Max Wall at Crown | 1.495 |
| Max Overall Length | 16.63 |
| Weight | 0.12 |
| Notes |
