Top Sellers

Toyota TIVN-1016 +1mm 3.0 2JZGE/GTE intake valve

Toyota Supra 3.0 2JZGE 2JZGTE Supertech intake valve TIVN-1014 STD

Product detailed specification
Model number	TIVN-1014
Head diameter	33.50mm
Stem diameter	5.98mm
Length	98.55mm
Material	Black nitrided stainless steel
Fits for	Toyota Supra - 3.0 (2JZGE, 2JZGTE)

24,00 €

Toyota Supra 3.0 2JZGE 2JZGTE Supertech intake valve TIVN-1016 +1mm

Product detailed specification
Model number	TIVN-1016
Head diameter	34.50mm
Stem diameter	5.98mm
Length	98.55mm
Material	Black nitrided stainless steel
Fits for	Toyota Supra - 3.0 (2JZGE, 2JZGTE)

26,00 €

Toyota Supra 3.0 2JZGTE Ultra Series JE Pistons kit CR 9.0 86mm 361341

Product detailed specification
Bore size	86.00mm
Stroke	86.00mm
JE Pistons compression ratio (CR)	9.0:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-9.80cm³
Compression height (CH)	34.00mm
Pin diameter	22mm
Features	Ultra series
Fits for	Toyota Supra - 3.0 (2JZGTE)

1 649,00 €

Toyota Supra 3.0 7M-GTE ARP main stud kit (2-bolt) 203-5402

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

260,00 €

Toyota YARIS GR 1.6 G16E-GTS Custom made JE Pistons kit 87.5mm CR 10.0:1

899,00 €

Toyota YARIS GR 1.6 G16E-GTS Custom made JE Pistons kit 87.5mm CR 10.5:1

899,00 €

Toyota Yaris GR G16E-GTS Athena Cooper Ring cylinder head gasket 92.2x1mm...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

189,00 €

Toyota Yaris GR G16E-GTS FCP H-beam steel connecting rods 143.7mm

Manufacturer: FCP Engineering
Model: FCPRHT143724B3/8"
Profile: H-beam
C to C: 143.70mm
Pin diameter: 24mm
Quantity: 3 pcs., 6 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 450HP (3 cylinder)
Advertised RPM rating: 9000RPM
Toyota Yaris GR - 1.6 (G16E-GTS)

399,00 €

Turbosmart ALV40 Outlet Weld Flange: 6-1 TS-0550-3114

Turbosmart Outlet Weld Flange Suit ALV40 Range of Fresh-Air / Bypass Anti-Lag Valves, suitable for 6 & 12 Cylinder engines.
These Flanges are machined in-house at Turbosmart to facilitate the fitment of the ALV40 to various engine configurations.
Outlet Port Size: 16mm

79,00 €

Turbosmart billet oil feed filter Black 44um -4AN TS-0804-1002

49,00 €

Turbosmart BMW N55 / S55 Kompact EM BOV VR9 Dual Port TS-0223-1092

269,00 €

Turbosmart Boost-Tee Boost Controller Black TS-0101-1102

The All New Boost Tee by Turbosmart is a facelift on the tried and tested Boost Tee you’ve come to love. Now featuring a 33% smaller and more ergonomic design, the All New Boost Tee incorporates all the same functionality that make it a crowd favourite including our unique Gate Feature for maximum boost response, anti-tamper locking feature and simple use.

The Boost Tee is a pneumatic bleed valve which allows an increase in boost on turbocharger systems where boost-based actuators are used and is suitable for use on both internal and external wastegate systems. By manipulating the reference signal to an internal wastegate actuator or external wastegate, an increase in boost over and above the base spring pressure can be achieved. It is common to achieve 100 - 200% increases in boost over the base spring pressure.

Using our proven detent system, the controller can increase boost in defined steps and the locking mechanism allows the boost level to be set & secure from tampering.

Manufactured in Australia from High-Grade Brass and Billet Aluminum, the All New Boost Tee by Turbosmart is a simple, elegant and robust solution which can be relied on for simple boost control & maximum response. The All New Boost Tee by Turbosmart is the best value upgrade for your Turbocharged engine!

89,00 €

Лидеры продаж