BMW

BMW BMEVN-1031S +1mm 1.8/2.5/2.8/3.0 exhaust valves

BMW 1.8 2.5 2.8 3.0 Supertech intake valve BMIVN-1031S +1mm

Product detailed specification
Model number	BMIVN-1031S
Head diameter	34.00mm
Stem diameter	5.97mm
Length	106.10mm
Material	Black nitrided stainless steel
Fits for	BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54)

29,00 €

BMW 3.2 S54B32 Supertech intake valve BMIVN-1040 STD

Product detailed specification
Model number	BMIVN-1040
Head diameter	35.00mm
Stem diameter	5.97mm
Length	117.50mm
Material	Black nitrited stainless steel
Fits for	BMW M3 E46 - 3.2 (S54B32)

31,00 €

BMW 3.0 N54B30 N55B30 S55B30 ACL Race connecting rod bearings 6B1584H-0.25

209,00 €

BMW E30 E36 1.6 1.8 2.0 M42 S42 FCP valve spring kit with retainers and seats...

Valve springs data:

Installed seat pressure - 38kg (84lbs)

Load - 92kg@10mm (203lbs@10mm)

Max. lift - up to 11mm

Made from chrome-silicon steel SAE9254-V

16 pcs. outer springs

16 pcs. inner springs

16 pcs. titanium retainers

16 pcs. seats

With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

499,00 €

Cometic BMW 3.5 M30 S38B35 S38B36 MLS cylinder head gasket 95x2.49mm C4478-098

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

325,00 €

Kelford BMW Gen1 B58 | Valve Springs & Retainers KVS57-BT

849,00 €

BMW M5 M6 S63B44 King main bearing set MB5801SM-0.25

Uper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SM	SM	4	1,2,4,5	0.000 / 0.000	0.000 / 70.000	22.400	2.494
SM	SM	1	3	0.000 / 0.000	0.000 / 70.000	27.051	2.494

179,00 €

BMW M3 S65 4.0 32V V8 Supertech retainer set RET-BMS65-BE1 for valve springs

599,00 €

BMW M5 S85 5.0 40V V10 Supertech retainer set RET-BMS65-BE1/40 for valve springs

749,00 €

Audi / VW / BMW Supertech 6mm single groove valve keeper / lock

Audi / VW / BMW / Opel / Renault Supertech 6mm single groove valve...

Part number KPR-6S-7
Supertech 6mm single groove valve keeper (lock)
Price is for 1 pc. (2 pcs. needed for one valve)
For:
Renault Megane - 2.0 16V (F4RT)
Opel / Vauxhall - 2.0 16V (Z20LET/LEH)
Audi / VW - 1.8T 2.4 2.7T 2.8 3.0 (5V/cyl.)
BMW - M42, S42, M50, M52, M54, S50 (USA), S52 (USA), S54
Toyota - 3.0 2JZGTE 2JZGE

3,00 €

BMW BMEVI-1030S Standard 1.8/2.5/2.8/3.0 exhaust valves

BMW M42 M50 M52 M54, S42/S50/S52 USA Supertech exhaust valve BMEVI-1030S STD

Product detailed specification
Model number	BMEVI-1030S
Head diameter	30.50mm
Stem diameter	5.96mm
Length	105.65mm
Material	Inconel
Fits for	BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54)

42,00 €

BMW M3 3.2 S54B32 JE Pistons CR 11.5:1 87.00mm

BMW M3 E46 3.2 S54B32 JE Pistons kit CR 11.5 87.5mm 297118

Product detailed specification
Bore size	87.50mm
Stroke	91.00mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	11.3:1
Dome volume (CC)	-13.80cm³
Compression height (CH)	32.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; FSR skirt
Fits for	BMW M3 E46 - 3.2 S54B32

1 349,00 €