BMW (17)

BMW M5 F10/F90 S63B44 ARP CA625+ cylinder head stud kit 201-4703

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€1,599.00

Toyota / BMW B58B30 Athena Cooper Ring cylinder head gasket 84x1mm 330155R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330155R

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

Cometic BMW 1.8 1.9 M42 M44 MLS cylinder head gasket 86x1.3mm C4349-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€199.00

Cometic BMW S14B20 S14B23 1986-91 MLS cylinder head gasket 94.5x1.3mm C4295-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€205.00

BMW 3.0 N54B30 N55B30 Athena Cooper Ring cylinder head gasket 86x1.5mm 330074R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330074R
Gasket thickness: 1.50mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

BMW M3 3.2 S54B32 JE Pistons CR 11.5:1 87.00mm

BMW M3 E46 3.2 S54B32 JE Pistons kit CR 11.5 87.5mm 297118

Product detailed specification
Bore size	87.50mm
Stroke	91.00mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	11.3:1
Dome volume (CC)	-13.80cm³
Compression height (CH)	32.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; FSR skirt
Fits for	BMW M3 E46 - 3.2 S54B32

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,349.00

BMW BMEVI-1030S Standard 1.8/2.5/2.8/3.0 exhaust valves

BMW M42 M50 M52 M54, S42/S50/S52 USA Supertech exhaust valve BMEVI-1030S STD

Product detailed specification
Model number	BMEVI-1030S
Head diameter	30.50mm
Stem diameter	5.96mm
Length	105.65mm
Material	Inconel
Fits for	BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54)

€49.00

BMW 4.4 V8 S63 FCP racing conical spring and retainer kit

Valve springs data
Made from chrome-silicon steel SAE9254-V
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Kit includes:
32 pcs. conical valve springs
32 pcs. titanium retainers

€1,099.00

BMW M5 E34 S38B36 ACL Race Series connecting rod bearings 6B1568H-STD

€199.00

BMW / Mini 2.0 B48B20 / B48A20 JE Pistons kit CR 10.5 82mm 384914 / 371718

Product detailed specification
Bore size	82.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	BMW / Mini - 2.0 Turbo (B48B20, B48A20)

€949.00

Cometic BMW 1.8 1.9 M42 M44 MLS cylinder head gasket 86x1.9mm C4349-075

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€245.00

BMW CR6640XP 2.0 2.2 2.3 2.5 2.7 2.8 3.0 connecting rod bearings

BMW M3 E30 S14 King Racing connecting rod bearings CR4596XP-STD

Upper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SX		4		47.99 / 47.98	52.01 / 52.00	20.0	1.994

€93.00