Clutches

Audi / VW 2.0 TFSI EA113 Ultra Series JE Pistons kit 82.5mm CR 9.5 367866

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-7.40cm³
Compression height (CH)	29.30mm
Pin diameter	20mm
Features	Ultra series
Fits for	Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA)

€1,069.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 83mm CR 8.5

Part number: FCPPASTR830085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 83.00mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

Connecting rod length must be 159mm

€989.00

BMW M50 M52 UPGRADED REINFORCED OIL PUMP SHAFT - TURBO

€219.00

VAG 1.8T 20V 95.5mm Stroker Supertech pistons CR 8.7 82.5mm P4-VW18T825-N17ST2

Product detailed specification
Bore size	82.50mm
Stroke	95.50mm
Supertech compression ratio (CR)	8.7:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-17cm³
Compression height (CH)	28.15mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

€899.00

Audi / VW 2.0 TSI EA888 JE Pistons CR 9.1 82.5mm 314311

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.1:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-10.80cm³
Compression height (CH)	29.60mm
Pin diameter	21mm
Piston weight	295g
Features	Accepts Turbo and Nitrous; full round Tuff coated piston skirt
Fits for	Audi / VW 2.0 TSI EA888 (CAWA, VAWB, CCTA, CCZB, CAEA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.

For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82mm CR 8

Part number: FCPPASTR820080/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.0:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must be 159mm

€989.00

BMW M52TU M54 UPGRADED REINFORCED OIL PUMP SHAFT - M54B30 TURBO

€219.00

Audi TTRS / RS3 CEPA DAZA ACL Race Series connecting rod bearing set...

€149.00

Boostline Conrod Set Audi S2 2.2 20V 144mm 20mm VW5670-787

Purpose-Built For Boost High Boost and Nitrous Audi S2 / RS2 Applications with 20mm Pin
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1000+ HP
3/8 x 1.600 in. ARP 2000 Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,499.00

BMW M50 / M52 / M54 / S52 - super damper 60-2 installation kit with ATI DAMPER

CrMo tool steel crankshaft hub to be used with ATI super damper
Lightweight 60-2 trigger wheel made of high tensile Domex steel
ATI super damper shown in the pictures is included
A/C pulley not compatible with the kit
Check/adjust the ignition timing after installing
Comes with mounting hardware

€999.00

VAG 1.8T 20V Athena Cooper Ring cylinder head gasket 83X1.6mm

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€229.00

Audi / VW 2.0 TSI EA888 JE Pistons CR 9.1 83mm 314312

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.1:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-11.5cm³
Compression height (CH)	29.60mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; full round coated piston skirt
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, VAWB, CCTA, CCZB, CAEA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00