There are no items in cart
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M8309H |
5M8309HX |
|
| Sizes | STD, .025, .25, 0.5 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.3616in / 59.984mm |
|
| Max Std Shaft Size |
2.3622in / 60mm |
|
| Min Std Tunnel Size |
2.5197in / 64mm |
|
| Max Std Tunnel Size |
2.5205in / 64.02mm |
|
| Max Wall at Crown |
0.0789in / 2.005mm |
0.0784in / 1.992mm |
| Max Overall Length |
0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange) |
|
| Notes | Thrust in #5 pos. | |
|
Diagram |
|
|
| 1,2,3,4,5 | |||||||
| Pairs & PN |
|
||||||
| Quantity | 5 | ||||||
| Crankshaft | 57.000 / 56.985 | ||||||
| Housing | 61.001 / 61.021 | ||||||
| Max Wall | 1.989 | ||||||
| Max Length | 20.599 |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.777 / 47.757 | ||||||
| Housing | 50.599 / 50.620 | ||||||
| Max Wall | 1.402 | ||||||
| Max Length | 18.971 |
| 1,2,3,5 | 4 | |||||||||||||
| Pairs & PN |
|
|
||||||||||||
| Quantity | 4 | 1 | ||||||||||||
| Crankshaft | 53.978 / 53.957 | 53.978 / 53.957 | ||||||||||||
| Housing | 58.999 / 59.017 | 58.999 / 59.017 | ||||||||||||
| Max Wall | 2.499 | 2.499 | ||||||||||||
| Max Length | 18.461 | 18.461 |
Fits for 6 cylinder Audi 2.7T 2.8 3.0 30V V6 engines.
Can be used with orginal springs or together with FCP high performance valve double spring kit.
Kit helps to eliminate valve float.
Retainers are very strong and light. Weight is only 9g and 4g. Grade 5.
18 pcs. intake valve titanium retainers
12 pcs. exhaust valve titanium retainers
Set includes:
1 cylinder head gasket (0.9x83.50mm)
1 valve cover gasket
1 intake manifold gasket
1 exhaust manifold gasket
1 universal sealing compound
2 camshaft seals
16 valve seals
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
Spring data:
Seat pressure - 75lbs @ 35.10mm
Open (lift) pressure - 191lbs @ 10mm
Spring coil bind - 20.70mm
Rate - 12.10lbs/mm
Max lift - 14.40mm
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Set includes:
Dual springs: 16 pcs. SPR-TS1015-Z20
Titanium retainers: 16 pcs. RET-TS5.5-T5
Seat locators: 16 pcs. SEAT-TS-Z20
