Audi / VW (30)

Audi TTRS RS3 2.5 20V TFSI FCP cтальные шатуны 144mm/22mm профиль H для...

Подробная спецификация продукта:

Производитель: FCP Engineering
Модель: FCPRHA14450622T-5

Profile: H-beam
С на С: 144mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 22mm
Количество: 5 шт., 10 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность:: 700HP (5 cylinder)
Mаксимальные обороты RPM: 9000RPM

539,00 €

Audi / VW 1.8T 20V JE Pistons kit CR 9.25 81.50mm 242881

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-3.10cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Round piston skirt
Fits for	VAG - 1.8T 20V

899,00 €

Audi S2 RS2 2.2T 20V 3B ABY ABU AAN Ajusa MLS cylinder head gasket set 52101100

Set includes:

1 MLS cylinder head gasket (82mm x 1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
1 valve cover gasket
20 valve seals
and etc.

159,00 €

Audi / VW 1.6 1.8 2.0 ACL Race Calico connecting rod bearings 4B1606HXC-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram (Top View)

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

150,00 €

Audi A6 S4 RS4 2.7T Mahle piston kit CR 9.0 81.50mm 930070509

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-7cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous
Fits for	Audi S4, RS4, A6 - 2.7 30V

1 349,00 €

FCP 6mm lash cap for solid lifter

Part number FCPLC/6mm.
FCP Engineering lash cap used with solid lifter.
hardness HRC 55, inner diameter 6mm, over deck 5mm.

4,00 €

Audi / VW R32 R36 24V Ferrea intake valve +1mm (long) F2294P

Ferrea Competition Plus Valves have built a reputation as the industry's most reliable extreme duty valve. To manufacture the valves we use special aerospace quality alloys, including the EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to thematerial structure. The valves are then heat-treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip.

43,00 €

Audi / VW 1.8 2.0 16V-20V ACL Race main bearings 5M1644H-0.50

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1644H	5M1644HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal
Min Std Shaft Size	2.1243in / 53.958mm
Max Std Shaft Size	2.1251in / 53.978mm
Min Std Tunnel Size	2.3228in / 59.000mm
Max Std Tunnel Size	2.3236in / 59.019mm
Max Wall at Crown	0.0985in / 2.502mm	0.0980in / 2.489mm
Max Overall Length	0.728in / 18.49mm
Notes	Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower.
Diagram (Top View)

Engines VAG group 4 cylinder engines 1.6 1.8 2.0 16-20V (KR, PL, AEB, etc.)

95,00 €

Audi A6 S4 RS4 2.7T JE Pistons kit CR 9.0 83mm 314327

Product detailed specification
Bore size	82.50mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-5.70cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; Round skirt
Fits for	Audi S4, RS4, A6 - 2.7 30V

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

1 349,00 €

ARP VAG 2.0 TFSI cam tower bolt kit 104-1001

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

111,00 €

Audi / VW 1.8T 20V JE Pistons kit CR 9.25 82mm 242882

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-3.6cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, round piston skirt
Fits for	VAG - 1.8T 20V

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

899,00 €

Audi 2.2T 10V / 2.2T / 2.3 20V 3B AAN 7A King Racing main bearings MB605XP-0.25

Position

1,2,3,4,5,6

Pairs & PN

XP	XP

M 601U-PR	M 601L-PR

Quantity

6

Crankshaft

57.978 / 57.958

Housing

63.000 / 63.017

Max Wall

2.499

Max Length

18.471

Engines: Audi 5 cylinder engines - 2.2T, 2.3 20V (3B, AAN, ADU, ABY, 7A)

109,00 €